Chapman Prospect: Copper-Nickel System Identified

RNS Number : 1857Z

Artemis Resources Limited

13 September 2022

 

13 September 2022

Artemis Resources Limited

("Artemis" or the "Company")

(ASX/AIM: ARV, FRA: ATY, US: ARTTF)

Chapman Prospect - Large Copper-Nickel System Identified in Drilling and Geophysics

Artemis Resources Limited is pleased to provide an update on assay results from the recent RC drilling programme targeting the Chapman Prospect located ~1km Southeast from its 100%-owned Carlow Gold and Copper Project in the West Pilbara region of Western Australia.

Highlights: 

· A follow up drill program was completed at the Chapman Prospect located ~ 1km southeast of Carlow Project, targeting a VTEM anomaly and previous high-grade intersections.

· Better intersections returned values of:

o  12.6m @ 0.43% Cu, 0.25% Ni, 0.018% Co, 0.08g/t Au from 79.93m, Hole 22CHRD001

§ including; 5.3m @ 0.56% Cu, 0.32% Ni, 0.020% Co, 0.07g/t Au from 82.2m

o  11m @ 0.56% Cu, 0.36% Ni, 0.020% Co, 0.03g/t Au from 37m, Hole ARC385

§ including; 2m @ 0.70% Cu, 0.69% Ni, 0.032% Co, 0.04g/t Au, from 40m

o  1.0m @ 1.07% Cu, 0.75% Ni, 0.04% Co, 0.03g/t Au, from 44m

o  1.0m @ 0.87% Cu, 0.28% Ni, 0.02% Co, 0.01g/t Au, from 46m

o  1.0m @ 1.06% Cu, 0.44% Ni, 0.025% Co, 0.03g/t Au from 131m, Hole ARC373

· Mineralisation is associated with ~1km long gabbro intrusion and basalt contact.

· A DHTEM (Down Hole Transient Electromagnetic) survey completed recently with modelling results highlighting additional targets.

· The next phase of Chapman exploration will be designed to seek areas of higher-grade mineralisation along this and other sub-regional trends at Chapman.

Alastair Clayton, Executive Director commented: "Intersecting broad shallow zones of continuous copper and nickel at Chapman is encouraging, especially as these mineralised zones appear to be related to the margins of regional gabbros and related structures. Drilling at Chapman undertaken in 2021 intersected high-grade copper mineralisation over a wide interval*. We look forward to refining and developing additional targets to further explore this ~1km long prospective trend".

*See ASX release 06 December 2021 "New Regional Discovery - High-grade Copper, Gold and Silver Intersected at Chapman Prospect"

A total of 11 holes comprising 10 RC holes and one diamond hole were completed for a total of 3,011.3m, of which 2,837 was RC and 174.3m was diamond (excluding the RC pre-collar). The location of these holes is shown in Figure 1.

http://www.rns-pdf.londonstockexchange.com/rns/1857Z_1-2022-9-12.pdf

Figure 1 : Location of the drill collars for the Chapman Prospect as they relate to the Greater Carlow Project

At Chapman the litho-geochemistry has been effective in defining the location of the Cu-Ni mineralisation over a strike length of 725m with the overall trend being in excess of 1km. Mineralisation is associated with semi-brittle to ductile structures formed by the intrusion of a north dipping Gabbro plug within the surrounding basalt country rock, shown in Figure 2.

Drilling to date indicates that mineralisation may be continuous (despite low grade) over a down dip portion of 130m which remains open at depth. High grade Cu-Au mineralisation drilled in 2021 in drill hole GLC007 appears to be associated with a northeast orientated brittle structure that offsets a portion of the gabbro to the south. Additional drilling perpendicular to the structure is required to define this structure.

http://www.rns-pdf.londonstockexchange.com/rns/1857Z_1-2022-9-12.pdf

Figure 2 : Geological setting of the Chapman Prospect showing the relationship between the mineralised trend and contact with the Gabbro body. Significant results are shown for respective drill holes.

http://www.rns-pdf.londonstockexchange.com/rns/1857Z_1-2022-9-12.pdf

Figure 3 : Local Section 10,000mN looking to the northwest showing significant intersections. Refer to Figure 2 for section location

http://www.rns-pdf.londonstockexchange.com/rns/1857Z_1-2022-9-12.pdf

Figure 4 : Local Section 10,440mN looking to the northwest showing significant intersections. Refer to Figure 2 for section location.

Table 1 : Significant results for RC holes drilled at Chapman

Significant Intervals >0.3% Cu, 2m internal dilution. NSI = No Significant Intervals
HoleID	Comment	From (m)	To (m)	Downhole Width (m)	Cu (%)	Ni %	Co (%)	Au g/t
ARC372		14	15	1	0.57	0.38	0.020	0.01
		68	72	4	0.36	0.27	0.024	0.01
	Including	70	71	1	0.52	0.48	0.041	0.02
		75	76	1	0.31	0.20	0.019	0.01
		80	83	3	0.20	0.74	0.024	0.24
	Including	80	81	1	0.74	0.24	0.024	0.02
		244	245	1	0.32	0.21	0.023	0.10
ARC373		73	74	1	0.38	0.04	0.006	0.02
		82	86	4	0.69	0.21	0.023	0.10
	Including	83	86	3	0.82	0.24	0.027	0.12
		118	119	1	0.68	0.21	0.015	0.01
		125	126	1	0.50	0.33	0.032	0.02
		131	132	1	1.05	0.44	0.024	0.03
ARC374		85	86	1	0.38	0.24	0.013	0.01
		101	102	1	0.33	0.05	0.016	0.13
		114	115	1	0.44	0.33	0.013	0.02
		161	162	1	0.39	0.16	0.005	0.16
ARC375		38	40	2	0.35	0.28	0.019	0.04
		45	46	1	0.34	0.20	0.015	0.02
HoleID	Comment	From (m)	To (m)	Downhole Width (m)	Cu (%)	Ni %	Co (%)	Au g/t
		52	53	1	0.38	0.11	0.015	0.02
		81	87	6	0.36	0.13	0.010	0.01
		131	132	1	0.99	0.02	0.016	0.48
ARC376		66	67	1	0.58	0.36	0.024	0.01
		76	77	1	0.44	0.24	0.012	0.04
		85	87	2	0.57	0.20	0.013	0.03
		90	91	1	0.31	0.13	0.010	0.01
ARC377		82	86	4	0.31	0.12	0.009	0.02
ARC382		99	100	1	0.31	0.20	0.013	0.02
		101	102	1	0.30	0.17	0.010	0.01
		112	114	2	0.35	0.23	0.010	0.03
ARC385		31	33	2	0.34	0.31	0.023	0.01
		37	48	11	0.56	0.36	0.020	0.25
	Including	40	42	2	0.70	0.69	0.032	0.04
	Including	44	45	1	1.08	0.75	0.040	0.03
	Including	46	47	1	0.87	0.28	0.021	0.01
ARC405		93	95	2	0.60	0.02	0.011	0.42
	Including	94	95	1	0.77	0.03	0.013	0.50
ARC407		147	149	2	0.21	0.33	-	-

Table 2 : Significant results for the diamond hole drilled at Chapman

Significant Intervals >0.3% Cu, 2m internal dilution. NSI = No Significant Results
Hole ID	Comment	From	To	Downhole width (m)	Cu %	Ni %	Co %	Au ppm
22CHRD001		76.46	78.36	1.9	0.30	0.16	0.013	0.02
		79.93	92.5	12.57	0.43	0.25	0.018	0.08
	Including	82.2	88.04	5.33	0.56	0.32	0.020	0.07
		125.94	127.7	1.76	0.42	0.15	0.010	0.01
		134.24	136.76	2.52	0.39	0.19	0.014	0.05
	Including	135.66	136.76	1.1	0.47	0.26	0.018	0.09

Down Hole Transient Electromagnetic (DHTEM) survey was collected from two drill holes, ARC407 located to the southeast of the main Chapman trend and diamond hole 22CHRD001.

The DHTEM data from ARC407 identified a weak broad off hole anomalism centred at ~60-70m down hole as shown in Figure 5. The source is above and to the south of ARC407 with further modelling required to constrain.

22CHRD001 DHTEM identified a weak off hole anomalism with the source appearing sub-parallel to hole geometry centred at ~55-80m down hole with a localised source. Relatively weak/low conductance and limited areal size and very likely relates to the original Chapman VTEM/FLTEM conductor. Further modelling may be required.

http://www.rns-pdf.londonstockexchange.com/rns/1857Z_1-2022-9-12.pdf

Figure 5 : Location of the VTEM anomaly and associated DHTEM plate in the southeast portion of the Chapman trend. Background is Legend Mining's VTEM image.

Table 3 : Drill Information for the drill holes completed at Chapman

HoleID	Type	East MGA	North MGA	RL (m)	Dip	Azimuth MGA	Total Depth (m)
22CHRD001	DD	507998.10	7697867.64	29.91	-60.32	212.21	174.30
ARC372	RC	507638.08	7698016.63	31.89	-60.07	212.11	342.00
ARC373	RC	507654.45	7698049.98	31.84	-60.28	214.10	339.00
ARC374	RC	508077.27	7697900.07	29.46	-60.00	210.00	342.00
ARC375	RC	508046.34	7697854.58	29.66	-60.00	210.00	342.00
ARC376	RC	508096.93	7697857.02	29.24	-59.93	212.50	254.00
ARC377	RC	508229.25	7697758.08	28.40	-59.35	212.97	162.00
ARC382	RC	507976.70	7697983.41	29.91	-59.61	212.18	342.00
ARC385	RC	507931.98	7697908.71	30.39	-61.34	208.98	342.00
ARC405	RC	507924.69	7697802.17	30.25	-59.90	129.21	162.00
ARC407	RC	508648.40	7697767.47	26.54	-69.39	210.07	210.00

Competent Persons Statement

The information in this announcement that relates to Exploration Results and Exploration Targets is based on information compiled or reviewed by Mr. Steve Boda, who is a Member of the Australasian Institute Geoscientists.  Mr. Boda is an employee of Artemis Resources Limited. Mr. Boda has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves'. Mr. Boda consents to the inclusion in the announcement of the matters based on his information in the form and context in which it appears.

About Artemis Resources

Artemis Resources (ASX: ARV; FRA: ATY; US: ARTTF) is a Perth-based exploration and development company, led by an experienced team that has a singular focus on delivering shareholder value from its Pilbara gold projects - the Greater Carlow Gold Project in the West Pilbara and the Paterson Central exploration project in the East Pilbara.

This announcement was approved for release by the Board.

For more information, please visit www.artemisresources.com.au  

Artemis Resources Limited	via Camarco
Alastair Clayton
WH Ireland Limited (Nominated Adviser and Broker)
Antonio Bossi / Megan Liddell (Corporate Finance)  Harry Ansell / Daniel Bristowe (Corporate Broking)	Tel: [phone] Tel: [phone]
Camarco (Public Relations)	Tel : [phone]
Gordon Poole / James Crothers Emily Hall / Rebecca Waterworth	Email: [e-mail]

JORC Code, 2012 Edition - Table 1

SECTION 1 SAMPLING TECHNIQUES AND DATA

 (Criteria in this section apply to all succeeding sections.)

Criteria			Commentary
Sampling techniques	· Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling. · Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used. · Aspects of the determination of mineralisation that are Material to the Public Report. · In cases where 'industry standard' work has been done this would be relatively simple (eg 'reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information.	· Reverse circulation drilling was used to obtain one metre samples, using a 5 ¼" face sampling hammer. · Diamond sampling techniques employed at the Artemis core facility include saw cut HQ (63mm) drill core samples. · Both RC and HQ wireline core is currently being used to drill out the geological sequences and identify zones of mineralisation that may or may not be used in any Mineral Resource estimations, mining studies or metallurgical testwork. · Industry standard procedures were used in the case of RC whereby a one (1)m sample was collected from which a 2-3kg sample was obtained and sent to a certified laboratory to pulverize and produce a 50g charge for fire assay. · Duplicate RC samples were collected at the rig from a static cone splitter, with the primary and duplicate bag both simultaneously collected from separate chutes. · For RC, the cyclone was cleared between rod changes to minimise contamination. · pXRF analysis was completed at the drill site and only used as a guide and test mineral components of a rock or alteration. No pXRF data was used in any reporting or Mineral Resource Estimations.
Drilling techniques	· Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc).	· Reverse Circulation drilling completed by Topdrill. · Drilling was completed using a truck mounted T685 Schramm rig mounted on 8x8 trucks · This can produce 1000psi/2700CFM with an axillary booster which is capable of achieving dry samples at depths of around 300m. · Diamond drilling was completed by TopDrill using a Sandvik truck mounted DE880 rig.
Drill sample recovery	· Method of recording and assessing core and chip sample recoveries and results assessed. · Measures taken to maximise sample recovery and ensure representative nature of the samples. · Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.	· Recoveries are recorded on logging sheets along with encounters with water and whether the samples are dry, moist or wet. · Drilling recoveries for Reverse Circulation drilling were >80% with some exceptions that maybe caused by loss of return through faults or encounters with water. · >90% of samples returned dry. · Statistical analysis shows that no bias of grade exists due to recoveries
Logging	· Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. · Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. · The total length and percentage of the relevant intersections logged.	· RC samples were collected from the static cone splitter as two samples, one bulk sample and one primary (analytical) sample. · The bulk samples are one metre splits. · These bags are then placed in neat rows of 50 bags each clear of the rig for safety reasons. · A field technician mixes the bag by hand before taking a sample using a sieve and sieves the sample to remove fines. · The sieved sample is then transferred to a wet sieve in a bucket of water, and the sample is sieved further until rock fragments are clearly visible. · These rock fragments are then logged by the site geologist, taking note of colour, grainsize, rock type, alteration if any, mineralisation if any, veining if any, structural information if notable and any other relevant information. · This information is then written down on pre-printed logging sheets, using codes to describe the attributes of the geology. · A representative sample is transferred to pre-labelled chip trays into the corresponding depth from where the sample was drilled from. · The remainder of the sample from the sieve is then transferred into a core tray that has been marked up by depths at metre intervals. · An identification sheet noting the hole number and from-to depths that correspond to each tray is then written up and placed above the tray and a photograph is taken of the chips. · The hole is logged in its entirety, hence 100% · The geological data would be suitable for inclusion in a Mineral Resource Estimation (MRE)
Sub-sampling techniques and sample preparation	· If core, whether cut or sawn and whether quarter, half or all core taken. · If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. · For all sample types, the nature, quality and appropriateness of the sample preparation technique. · Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples. · Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling. · Whether sample sizes are appropriate to the grain size of the material being sampled.	· RC samples were collected on the drill rig using a cone splitter. If any mineralised samples were collected wet these were noted in the drill logs and database. · The RC drilling rig is equipped with a rig-mounted cyclone and static cone splitter, which provided one bulk sample of approximately 20-30 kilograms, and a sub-sample of approximately 2-4 kilograms for every metre drilled. · Field QC procedures involve the use of Certified Reference Materials (CRM's) as assay standards, along with duplicates and blank samples. The insertion rate of these was approximately 1:20. · For RC drilling, field duplicates were taken on a routine basis at approximately 1:20 ratio using the same sampling techniques (i.e. cone splitter) and inserted into the sample run. · Primary and duplicates results have been compared. · The sample sizes are appropriate, representative and are considered more than adequate to ensure that there are no particle size effects relating to the grain size of the mineralisation.
Quality of assay  data and laboratory tests	· The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. · For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. · Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have been established.	· A certified laboratory, ALS Chemex (Perth) was used for all analysis of drill samples submitted. The laboratory techniques below are for all samples submitted to ALS and are considered appropriate for the style of mineralisation defined within the Carlow Castle Project area · The sample preparation followed industry best practice. Fire assay samples were dried, coarse crushing to ~10mm, split to 300g subsample, followed by pulverisation in an LM5 or equivalent pulverising mill to a grind size of 85% passing 75 micron. · This fraction was split again down to a 50g charge for fire assay · 50-gram Fire Assay (Au-AA26) with ICP finish for Au. · All samples were dried, crushed, pulverised and split to produce a sub-sample of 50g which is digested and refluxed with hydrofluoric, nitric, hydrochloric and perchloric acid (4 acid digest). · This digest is considered a total dissolution for most minerals · Analytical analysis is performed using ICP-AES Finish (ME-ICP61) for Ag, Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, K, La, Mg, Mn, Mo, Na, Ni, P, Pb, S, Sb, Sc, Sr, Th, Ti, Tl, U, V, W, Zn. · Additional Ore Grade ICP-AES Finish (ME-OG62) for Cu reporting out of range. · Standards are matrix matched by using previous pulps from drilling programs and homogenised using certified laboratories. · Standards were analysed by round robins to determine grade. · Standards were routinely inserted into the sample run at 1:20. · Laboratory standards and blank samples were inserted at regular intervals and some duplicate samples were taken for QC checks.
Verification of sampling and assaying	· The verification of significant intersections by either independent or alternative company personnel. · The use of twinned holes. · Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. · Discuss any adjustment to assay data.	· Sampling was undertaken by field assistants supervised by experienced geologists from Artemis Resources. Significant intercepts were checked by senior personnel who confirmed them as prospective for gold mineralisation. · No twin holes using RC was completed in this program. · Electronic data capture on excel spreadsheets which are then uploaded as .csv files and routinely sent to certified database management provider. · Routine QC checks performed by Artemis senior personnel and by database management consultant. · PDF laboratory certificates are stored on the server and are checked by the Exploration Manager.
Location of data points	· Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. · Specification of the grid system used. · Quality and adequacy of topographic control.	· A Garmin GPSMap62 hand-held GPS was used to define the location of the initial drill hole collars. Standard practice is for the GPS to be left at the site of the collar for a period of 5 minutes to obtain a steady reading. Collar locations are considered to be accurate to within 5m. · A high-quality downhole north-seeking multi-shot or continuous survey gyro-camera was used to determine the dip and azimuth of the hole at 30m intervals down the hole · The topographic surface was calculated from the onsite mine survey pickups and subsequently verified by RTK GNSS collar surveys. · Zone 50 (GDA 94). · Surface collar coordinates are surveyed via RTK GNSS with 1cm accuracy by a professional surveying contractor. ·
Data spacing and distribution	· Data spacing for reporting of Exploration Results. · Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. · Whether sample compositing has been applied.	· In certain areas, current drill hole spacing is variable and dependent on specific geological, and geochemical targets. · A nominal 40x20m drill spacing is considered adequate to establish the degree of geological and grade continuity appropriate for JORC (2012) classifications applied. · No sample compositing to date has been used for drilling completed by Artemis. All results reported are the result of 1 metre downhole sample intervals.
Orientation of data in relation to geological structure	· Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. · If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.	· Drill holes were designed to be perpendicular to the strike of known mineralisation. Due to the structural and geological complexity of the area, mineralisation of unknown orientation can be intersected.
Sample security	· The measures taken to ensure sample security.	· The chain of custody is managed by the supervising geologist who places calico sample bags in polyweave sacks. Up to 10 calico sample bags are placed in each sack. Each sack is clearly labelled with: o  Artemis Resources Ltd o  Address of laboratory o  Sample range · Samples were delivered by Artemis personnel to the transport company in Karratha and shrink wrapped onto pallets. · The transport company then delivers the samples directly to the laboratory.
Audits or reviews	· The results of any audits or reviews of sampling techniques and data.	· Data is validated upon up-loading into the master database. Any validation issues identified are investigated prior to reporting of results.

SECTION 2 REPORTING OF EXPLORATION RESULTS

 (Criteria listed in the preceding section also apply to this section.)

Criteria			Commentary
Mineral tenement and land tenure status	· Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. · The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area.	· Drilling by Artemis was carried out on E47/1797 - 100% owned by Artemis Resources Ltd. This tenement forms a part of a broader tenement package that comprises the West Pilbara Project. · This tenement is in good standing.
Exploration done by other parties	· Acknowledgment and appraisal of exploration by other parties.	· The most significant work to have been completed historically in the Carlow Castle area, including the Little Fortune and Good Luck prospects, was completed by Open Pit Mining Limited between 1985 and 1987, and subsequently Legend Mining NL between 1995 and 2008. · Work completed by Open Pit consisted of geological mapping, geophysical surveying (IP), and RC drilling and sampling. · Work completed by Legend Mining Ltd consisted of geological mapping and further RC drilling. · Legend also completed an airborne ATEM survey over the project area, with follow up ground-based FLTEM surveying. Re-processing of this data was completed by Artemis and was critical in developing drill targets for the completed RC drilling. · Compilation and assessment of historic drilling and mapping data completed by both Open Pit and Legend has indicated that this data is compares well with data collected to date by Artemis. Validation and compilation of historic data is ongoing. · All exploration and analysis techniques conducted by both Open Pit and Legend are considered to have been appropriate for the style of deposit.
Geology	· Deposit type, geological setting and style of mineralisation.	· The Carlow Castle Co-Cu-Au prospect includes a number of mineralised shear zones, located on the northern margin of the Andover Intrusive Complex. Mineralisation is exposed in numerous workings at surface along quartz-rich shear zones. Both oxide and sulphide mineralisation are evident at surface associated with these shear zones. · Sulphide mineralisation appears to consist of Chalcopyrite, chalcocite, cobaltite, pyrrhotite and pyrite
Drill hole Information	· A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: · easting and northing of the drill hole collar · elevation or RL (Reduced Level - elevation above sea level in metres) of the drill hole collar · dip and azimuth of the hole · down hole length and interception depth · hole length. · If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.	· Drill hole information is contained within this release.
Data aggregation methods	· In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated. · Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. · The assumptions used for any reporting of metal equivalent values should be clearly stated.	· All intervals reported are composed of 1 metre down hole intervals for Reverse Circulation drilling. · Aggregated intercepts do include reported lengths of higher-grade internal intercepts. · No upper or lower cut-off grades have been used in reporting results. · No metal equivalent calculations are used in this report.
Relationship between mineralisation widths and intercept lengths	· These relationships are particularly important in the reporting of Exploration Results. · If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported. · If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg 'down hole length, true width not known').	· The mineralisation in the Carlow Castle Western Zone strikes generally E-W and dips to the north at approximately -75 to -80 degrees. The drill orientation was 180 -60 dip. Drilling is believed to be generally perpendicular to strike. Given the angle of the drill holes and the interpreted dip of the host rocks and mineralisation, reported intercepts approximate true width. · True thicknesses are calculated from interpretation deriving from orientation of high-grade intervals, orientation of the main mineralised trend and its dip.
Diagrams	· Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.	· Appropriate plans are shown in the text.
Balanced reporting	· Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.	· This release reports the results of six RC holes out of a nine hole program. The significant results tabulated in the release are reported at a base grade of >0.5 g/t Au or >0.5% Cu. Internal dilution of up to 2 m may be included in an intersection.
Other substantive exploration data	· Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.	· Targeting for the RC drilling completed by Artemis was based on compilation of historic exploration data, and the surface expression of the targeted mineralised shear zones and associated historic workings. ·
Further work	· The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or large-scale step-out drilling). · Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.	· Further work (RC and diamond drilling) is justified to locate extensions to mineralisation both at depth and along strike.

 

END

 

 

MSCLTMMTMTJBTIT