Results from Newcrest's Drill Campaign at Havieron

RNS Number : 6878G

Greatland Gold PLC

25 July 2019

 

25 July 2019

Dissemination of a Regulatory Announcement that contains inside information according to REGULATION (EU) No 596/2014 (MAR).

Greatland Gold plc

("Greatland" or "the Company")

First Results from Newcrest's Drilling Campaign at Havieron

Excellent first drill results from Newcrest's campaign at Greatland's Havieron project confirm the presence of higher grade gold-copper mineralisation

HAD006 extension: 52m @ 7.0 g/t Au and 0.17% Cu from 1122m

Including, 17m @ 21 g/t Au and 0.39% Cu from 1153m

HAD011: 39m @ 1.1 g/t Au and 0.82% Cu from 754m

and, 14m @ 2.9 g/t Au and 1.1% Cu from 779m

Mineralisation now observed over 700m of vertical extent and remains open

Greatland Gold plc (AIM:GGP), the precious and base metals exploration and development company, is pleased to announce the first results from Newcrest's drilling campaign at Greatland's 100% owned Havieron licence in the Paterson region of Western Australia. In addition, Greatland is pleased to announce that a third rig has commenced operation at Havieron and a fourth rig is expected to arrive at site in August.

Greatland notes the release of the June Quarterly Exploration Report by Newcrest Mining Ltd ("Newcrest") today, in which Newcrest states: "First drill results from the Havieron Project in Paterson province Western Australia have confirmed the presence of higher grade copper-gold mineralisation, with best results including 17 m @ 21 g/t Au and 0.39% Cu from 1153 m (HAD006 extension)."

Highlights of Results from Newcrest's Drilling Campaign at Havieron:

·    Results confirm high-grade gold-copper mineralisation, broaden mineralised extents defined by prior drilling and extend the depth of observed mineralisation at Havieron.

·    Two rigs were operational with one existing drill hole extended (HAD006) and two new holes completed (HAD010 and HAD011) for a total of 2800m of drilling.

·    HAD006: Newcrest extended Greatland's hole HAD006 from 838m to 1216m, the deepest on the project to date, and successfully identified high-grade mineralisation at depth, with mineralisation now observed over 700m in vertical extent, assay results include:

o  12m @ 3.1 g/t Au and 0.08% Cu from 1071m

o  52m @ 7.0 g/t Au and 0.17% Cu from 1122m, including

§ 17m @ 21 g/t Au and 0.39% Cu from 1153m

·    HAD011: Hole HAD011 extended the known mineralised breccia and confirmed that copper grades are increasing with depth, with local values up to 2.3% Cu, assays results include:

o  39m @ 1.1 g/t Au and 0.82% Cu from 754m, and

§ 14m @ 2.9 g/t Au and 1.1% Cu from 779m

o  48m @ 0.59 g/t Au and 0.90% Cu from 838m

·    HAD010: Hole HAD010 traversed over the top of the mineralised zone in the cover sequence and did not intersect significant mineralisation.

Next steps for Havieron:

·    Newcrest to expand its exploration campaign from two drill rigs to four - third drill rig has commenced operation and a fourth is scheduled to arrive at site in August.

·    Drill programme designed to:

o  Further define the extent of the upper gold zone;

o  Test the depth extents of the mineralisation and associated magnetic anomaly; and

o  Search for additional zones of mineralised breccia within the footprint of the coincident magnetic anomaly.

Gervaise Heddle, Chief Executive Officer of Greatland Gold plc, commented:  "We are delighted by these excellent early results from Newcrest's drilling campaign and by Newcrest's acceleration of the exploration programme at Havieron as demonstrated by the commencement of a third rig at site and the imminent addition of a fourth.

"We are particularly pleased to see that the hole HAD006 extension, the deepest hole to date at Havieron, identified high-grade mineralisation at depth, which further supports our view that Havieron has the potential to become a large, underground mining operation in one of the most mining-friendly jurisdictions in the world.

"These results also reinforce our view regarding the prospectivity of the Paterson region and, more specifically, the potential for other magnetic anomalies in the region, such as the multiple targets recently identified at our Paterson Range East licence, to host tier-one gold-copper deposits.

"We look forward to providing further updates on Newcrest's drilling campaign at Havieron and Greatland's ongoing exploration activities across the Paterson."

Background to Havieron and Farm-in Agreement with Newcrest

In March 2019, Greatland signed a Farm-in Agreement with Newcrest Operations Limited, a wholly-owned subsidiary of Newcrest Mining Limited (ASX:NCM), to explore and develop Greatland's Havieron gold-copper project in the Paterson region of Western Australia. Newcrest has the right to acquire up to a 70% interest in a 12-block area within E45/4701 that covers the Havieron target by spending up to US$65m.

Greatland's Paterson project covers more than 385 square kilometres in the Paterson region of Western Australia and includes the Havieron licence, the Paterson Range East licence, and the Black Hills licence.

Limited historical drilling was conducted by Newcrest Mining Limited at Havieron during the 1990s and early 2000s where six holes were drilled, all of which intersected significant alteration and gold plus copper anomalism. Thick lower grade zones of gold and copper were intersected by Newcrest and gold grades within these peaked at 15.4g/t and copper to 2.5%.

Greatland's drilling campaigns at Havieron have yielded excellent results to date, including*:

·    HAD001:       121m @ 2.9g/t Au and 0.23% Cu from 497m.

·    HAD003:       21m @ 3.8g/t Au and 0.44% Cu from 418m.

·    HAD005:       103m @ 3.5g/t Au and 0.93% Cu from 459m and;

                      128m@ 7.4g/t Au and 0.54% Cu from 660m.

·    HAD006:       54m @ 2.7g/t Au and 0.79% Cu from 471m and;

                      179.1m @ 1.4g/t Au and 0.47% Cu from 547.9m.

·    HAD008:       67m @ 2.0g/t Au and 0.91% Cu from 426m.

*The above results have been recalculated by Newcrest using company specific "data aggregation methods".  Length-weighted averages exceeding 1.0 g/t Au or 0.5% Cu for greater than or equal to 10m, with less than 1 m of consecutive internal dilution; and length-weighted averages exceeding 0.2 g/t Au for greater than or equal to 20m, with less than 10m of consecutive internal dilution. No top cuts are applied to intercept calculations.

Data aggregation methods adopted by Newcrest are industry standard practice for assessing mineralisation widths and their relationship to underground mining techniques.

A regional map showing the Havieron licence area with regional targets and adjacent landholdings can be found at: www.greatlandgold.com/paterson/ 

The full Newcrest Quarterly Exploration Report can be viewed on Newcrest's website at: www.newcrest.com.au/investors/reports/quarterly/ 

Newcrest Drilling at Havieron

First drill results from the Havieron Project in Paterson province Western Australia have confirmed the presence of higher grade copper-gold mineralisation, with best results including 17m @ 21 g/t Au and 0.39% Cu from 1153m (HAD006 extension).

The Havieron Project is operated by Newcrest under a farm-in agreement with Greatland.  It is centred on a deep magnetic anomaly located 45km east of Telfer. The target is overlain by more than 400m of post mineralised cover. Newcrest commenced drilling during the June 2019 quarter. Two rigs were operational with one existing drill hole, HAD006 extended and two new holes, HAD010 and HAD011, completed for a total of 2800m of drilling. A third rig has since commenced operation at site.

Newcrest extended Greatland's hole HAD006 from 838m to 1,216m. Hole HAD006, the deepest on the project to date, has successfully identified high grade mineralisation at depth, with mineralisation now observed over 700m in vertical extent, and remaining open at depth, to the north and south. Assay results returned include:

·    HAD006 (extension):       23m @ 1.0 g/t Au and 0.19% Cu from 872m

                                           12m @ 3.1 g/t Au and 0.08% Cu from 1071m

                                           52m @ 7.0 g/t Au and 0.17% Cu from 1122m

                                           incl 17m @ 21 g/t Au and 0.39% Cu from 1153m

Hole HAD010 was drilled to the southeast of the main complex and did not intersect any significant mineralisation. Drilling has traversed over the top of the mineralised zone in the cover sequence.

In Newcrest hole HAD011, sulfide-bearing breccia was observed over 100m laterally at -500mRL on either side of the central post mineral dolerite dyke.  Assays results from the zones included:

·    HAD011:          39m @ 1.1g/t Au and 0.82% Cu from 754m

48m @ 0.59g/t Au and 0.90% Cu from 838m

Hole HAD011 extended the known mineralised breccia and confirmed that copper grades are increasing with depth, with local values up to 2.3% Cu. Higher-grade gold mineralisation was observed in these zones, with the highest value being 1m at 13g/t Au.

Additional drill hole information is presented in Appendix I and tabulated drill hole intercepts are presented in Appendix II. Drill hole collar locations and a cross section can be found on the Company's website at: www.greatlandgold.com/paterson/ 

Following are the drill results previously completed by Greatland which have now been aligned with Newcrest exploration reporting standards:

·    HAD001:          121m @ 2.9g/t Au and 0.23% Cu from 497m

·    HAD003:          21m @ 3.8g/t Au and 0.44% Cu from 418m

·    HAD005:          103m @ 3.5g/t Au and 0.93% Cu from 459m

                          128m @ 7.4g/t Au and 0.54% Cu from 660m

·    HAD006:          54m @ 2.7g/t Au and 0.79% Cu from 471m

                                            179.1m @ 1.4 g/t Au and 0.47% Cu from 547.9m

·    HAD008:          67m @ 2.0g/t Au and 0.91% Cu from 426m

Future drilling programs will continue to assess the distribution and controls of higher grade gold and copper mineralisation intersected to date.

Competent Person:

Information in this announcement that relates to Havieron exploration results has been extracted from the following announcement:

"Newcrest Quarterly Exploration Report - June 2019", dated 25 July 2019

Information in this announcement, which has been taken from Newcrest Mining Limited's Quarterly Exploration Report dated 25 July 2019, has been reviewed and approved by Mr Mick Sawyer, a member of the Australian Institute of Geoscientists and a Registered Professional Geoscientist (R.P.Geo #10194), who has more than 15 years relevant industry experience. Mr Sawyer consents to the inclusion in this announcement of the matters based on this information in the form and context in which it appears. The company confirms that it is not aware of any new information or data that materially affects the information included in the relevant market announcement. The company confirms that the form and context in which the information has been presented has not been materially modified. Mr Mick Sawyer, full time employee of Greatland Pty Ltd and Exploration Manager, has sufficient experience relevant to the style of mineralisation and type of deposit under consideration, and to the activity which he is undertaking to qualify as a Competent Person in accordance with the guidance note for Mining, Oil & Gas Companies issued by the London Stock Exchange in respect of AIM Companies, which outlines standards of disclosure for mineral projects.

Enquiries:

 

Greatland Gold PLC

Gervaise Heddle/Callum Baxter

Tel: [phone]

Email:  [e-mail]

www.greatlandgold.com

SPARK Advisory Partners Limited (Nominated Adviser)

Andrew Emmott/James Keeshan

Tel: [phone]

SI Capital Limited (Broker)

Nick Emerson/Alan Gunn

Tel:  [phone]

Luther Pendragon (Media and Investor Relations)

Harry Chathli/Alexis Gore/Joe Quinlan

Tel: [phone]

Notes for Editors:

Greatland Gold plc is a London-listed (LON:GGP) natural resource exploration and development company with a current focus on gold, copper and nickel exploration projects.

The Company has six main projects; four situated in Western Australia and two in Tasmania.  All projects are 100% owned by Greatland.

In March 2019, Greatland signed a Farm-in Agreement with Newcrest Operations Limited, a wholly-owned subsidiary of Newcrest Mining Limited (ASX:NCM), to explore and develop Greatland's Havieron gold-copper project in the Paterson region of Western Australia. Newcrest has the right to acquire up to a 70% interest in a 12-block area within E45/4701 that covers the Havieron target by spending up to US$65m.

Greatland is seeking to identify large mineral deposits in areas that have not been subject to extensive exploration previously. It is widely recognised that the next generation of large deposits will come from such under-explored areas and Greatland is applying advanced exploration techniques to investigate a number of carefully selected targets within its focused licence portfolio.

The Company is also actively investigating a range of new opportunities in precious and strategic metals and will update the market on new opportunities as and when appropriate.

 

APPENDIX I

Havieron Project (Greatland Gold plc farm-in agreement): JORC Table 1

Section 1 Sampling Techniques and Data

Criteria	Commentary
Sampling techniques	Diamond core samples are obtained from diamond drilling in Proterozoic basement lithologies. PQ-HQ and NQ diameter diamond core was drilled on a 6m run. Diamond core was cut using an automated core-cutter and half core sampled at 1 m intervals with breaks for major geological changes. Sampling intervals range from 0.2 - 1.0 m. Cover sequences were not sampled owing to the drilling method deployed (mud rotary drilling).
Drilling techniques	Permian Paterson Formation cover sequence was drilled using mud rotary drilling technique. Depths of cover typically observed to approximately 420 m vertically below surface. Steel casing was emplaced to secure the pre-collar. Diamond drilling was advanced from the base of the cover sequence with PQ3, HQ3 and NQ2 diameter coring configuration.  Diamond core from inclined drill holes are oriented on 6 m runs using an electronic core orientation tool (Reflex ACTIII). At the end of each run, the bottom of hole position is marked by the driller, which is later transferred to the whole drill core run length with a bottom of hole reference line.
Drill sample recovery	Diamond core recovery is systematically recorded from the commencement of diamond coring to end of hole, by reconciling against driller's depth blocks in each core tray with data recorded in the database. Drillers depth blocks provided the depth, interval of core recovered, and interval of core drilled. Diamond core recoveries were typically 100%, with isolated zones of lower recovery. Cover sequence drilling by the mud-rotary drilling did not yield recoverable samples.
Logging	Geological logging recorded qualitative descriptions of lithology, alteration, mineralisation, veining, and structure (for all diamond core drilled), including orientation of key geological features. Geotechnical measurements were recorded including Rock Quality Designation (RQD) fracture frequency, solid core recovery and qualitative rock strength measurements. Magnetic susceptibility measurements were recorded every metre. The bulk density of selected drill core intervals was determined at site on whole core samples. All geological and geotechnical logging was conducted at Havieron site. Digital data logging was captured on diamond drill core intervals only, and all data validated and stored in an AcQuire database. All drill cores were photographed, prior to cutting and/or sampling the core.
Sub-sampling techniques and sample preparation	Sampling, sample preparation and quality control protocols are considered appropriate for the material being sampled. Diamond core was cut and sampled at the Telfer core processing facility. Half core samples were collected in pre-numbered calico bags and grouped in plastic bags for despatch to the laboratory. Sample weights typically varied from 0.5 to 4 kg. Sample sizes are considered appropriate for the style of mineralisation. Drill core samples were freighted by air and road to the laboratory. Sample preparation was conducted at Intertek Laboratory, Perth. Samples were dried at 105oC, and crushed to 95% passing 4.75 mm, and the split to obtain up to 3 kg sub-sample, which was pulverised (using LM5) to produce a pulped product with the minimum standard of 95% passing 106 μm. Duplicate samples were collected from crush and pulp samples at a rate of 1:20. Duplicate results show an acceptable level of variability for the material sampled and style of mineralisation. Periodic size checks (1:20) for crush and pulp samples and sample weights are provided by the laboratory and recorded in the Acquire database.
Quality of assay data and laboratory tests	Assaying of diamond drill core samples was conducted at Intertek, Perth. All samples were assayed for 48 elements using a 4-acid digestion followed by ICP-AES/ICP-MS determination (method 4A/MS907). Gold analyses were determined by 50 g fire assay with AAS finish (method FA50N/AA). Sampling and assaying quality control procedures consisted of inclusion of certified reference material (CRMs), coarse residue and pulp duplicates with each batch (at least 1:20). Assays of quality control samples were compared with reference samples in AcQuire database and verified as acceptable prior to use of data from analysed batches. Laboratory quality control data, including laboratory standards, blanks, duplicates, repeats and grind size results are captured in Acquire database and assessed for accuracy and precision for recent data. Due to the limited extent of the drilling program to date, extended quality control programs are yet to be undertaken, whereby pulped samples will be submitted to an umpire laboratory and combined with more extensive re-submission programs. Analysis of the available QC sample assay results indicates that an acceptable level of accuracy and precision has been achieved and the database contains no analytical data that has been numerically manipulated. The assaying techniques and quality control protocols used are considered appropriate for the data to be used for reporting exploration drilling results.
Verification of sampling and assaying	Sampling intervals defined by the Geologist are electronically assigned sample identification numbers prior to core cutting. Corresponding sample numbers matching pre-labelled calico bags are assigned to each interval. All sampling and assay information were stored in a secure Acquire database with restricted access. Electronically generated sample submission forms providing the sample identification number accompany each submission to the laboratory. Assay results from the laboratory with corresponding sample identification are loaded directly into the Acquire database. Assessment of reported significant assay intervals was verified by re-logging of diamond drill core intervals and assessment of high-resolution core photography. The verification of significant intersections has been completed by company personnel and the Competent Person. No adjustments are made to assay data, and no twinned holes have been completed.
Location of data points	Drill collar locations were surveyed using a differential GPS with GNSS with a stated accuracy of +/- 0.5m.  Drill rig alignment was attained using an electronic azimuth aligner. Downhole survey was collected at 6-12 m intervals in the cover sequence, and every 6 m in diamond drill core segments of the drill hole. At the end of hole, all holes have been surveyed using a continuous gyro survey to surface (Axis Mining Champ Gyro). Topographic control is established from SRTM (1 second) topographic data and derived digital elevation model. The topography is generally low relief to flat, with an average elevation of 265 m, within dune corridors. All collar coordinates are provided in the Geocentric Datum of Australian (GDA94 Zone 51S).
Data spacing and distribution	The drill hole spacing ranges from 50 - 500 m in lateral extent within an area of 1.5 square kilometres. The current drill hole spacing does not provide sufficient information for the estimation of a Mineral Resource. Significant assay intercepts remain open. Further drilling is required to determine the extent of currently defined mineralisation. Reported assay results from 2 drill holes pertain only to drill holes completed or in progress as part of Newcrest's drilling programs since May 2019. Further assay results are yet to be reported for completed drill holes. No sample compositing is applied to samples.
Orientation of data in relation to geological structure	Drilling of reported holes HAD010, HAD011 is oriented perpendicular to a central dolerite now observed in several of the historic drill holes, and Newcrest drill hole HAD011. The dolerite dyke has a north-south orientation, with drilling established on an east-west orientation.  Drill hole HAD006 is an extension of a prior Greatland Gold drill hole from 838 m to 1216.3 m and is a vertical hole, which drills sub-parallel to a central dolerite dyke, breccia body and mineralised intrusive. Drill holes intersect moderately dipping carbonate and siliclastic sedimentary facies, mineralised breccia and sub-vertical intrusive lithologies, and aim to explore the extents of the Havieron mineral system. There is presently insufficient information to confirm the geological model or true thickness of mineralised intervals.
Sample security	The security of samples is controlled by tracking samples from drill rig to database. Drill core was delivered from the drill rig to the Havieron core yard every shift. On completion of geological and geotechnical logging, core was transported by vehicle to Telfer core processing facility by Newcrest personnel. High resolution core photography and cutting of drill core was undertaken at the Telfer core processing facility. Samples were freighted in sealed bags by air and road to the Laboratory, and in the custody of Newcrest representatives.  Sample numbers are generated directly from the database. All samples are collected in pre-numbered calico bags. Verification of sample numbers and identification is conducted by the laboratory on receipt of samples, and sample receipt advise issued to Newcrest. Details of all sample movement are recorded in a database table. Dates, Hole ID sample ranges, and the analytical suite requested are recorded with the dispatch of samples to analytical services. Any discrepancies logged at the receipt of samples into the analytical services are validated.
Audits or reviews	Due to the limited duration of the program, no external audits or reviews have been undertaken. Internal verification and audit of Newcrest exploration procedures and databases are periodically undertaken.

Section 2 Reporting of Exploration Results

Criteria	Commentary
Mineral tenement and land tenure status	The Havieron Project is entirely contained within 12 sub-blocks of E45/4701, which is 100% owned by Greatland Pty Ltd. Newcrest has entered into an Exploration Farm-In agreement with Greatland Pty Ltd and Greatland Gold Plc effective 12 March, 2019, with Newcrest as Manager of the Havieron Project. There is a current ILUA (Indigenous Land Use Agreement) signed in December 2015 which extends to the Havieron Project.  All obligations with respect to legislative requirements including minimum expenditure are maintained in good standing.
Exploration done by other parties	Newcrest Mining Limited completed six diamond core holes in the vicinity of the Havieron Project from 1991 to 2003. Greatland Gold completed drill targeting and drilling of 9 Reverse Circulation (RC) drill holes with diamond tails for a total of approximately 6,800 m in 2018. Results of drilling programs conducted by Greatland Gold have previously been reported on the Greatland Gold web site. Drilling has defined an intrusion-related mineral system with evidence of breccia- and massive sulphide-hosted higher-grade gold-copper mineralisation.
Geology	The Havieron Project is located within the north-western exposure of the Palaeo-proterozoic to Neoproterozoic Paterson Orogen (formerly Paterson Province), 45 km east of Telfer.  The Yeneena Supergroup hosts the Havieron prospect and consists of a 9 km thick sequence of marine sedimentary rocks, and is entirely overlain by approximately 420 m of Phanerozoic sediments of the Paterson Formation and Quaternary aeolian sediments. Gold and copper mineralisation at Havieron consist of breccia, vein and massive sulphide replacement gold and copper mineralisation typical of intrusion-related and skarn styles of mineralisation. Mineralisation at the prospect is hosted by metasedimentary rocks (meta-sandstones, meta-siltstones and meta-carbonate) and intrusive rocks of an undetermined age. The main mineral assemblage contains well developed pyrrhotite-chalcopyrite and pyrite sulphide mineral assemblages as breccia and vein infill, and massive sulphide lenses. The main mineralisation event is associated with amphibole-carbonate-biotite-sericite-chlorite wall rock alteration.
Drill hole Information	As provided.
Data aggregation methods	Significant assay intercepts are reported as (A) length-weighted averages exceeding 1.0 g/t Au or 0.5% Cu for greater than or equal to 10 m, with less than 10 m of consecutive internal dilution; and (B) length-weighted averages exceeding 0.2 g/t Au for greater than or equal to 20 m, with less than 10 m of consecutive internal dilution. No top cuts are applied to intercept calculations.
Relationship between mineralisation widths and intercept lengths	Significant assay intervals reported represent apparent widths. Insufficient geological information is available to confirm the geological model.
Diagrams	As provided.
Balanced reporting	This is the first release of Exploration Results for this project made by Newcrest. Earlier reporting of exploration programs conducted by Greatland Gold have previously been reported. Exploration drilling programs are ongoing and further material results will be reported in subsequent Newcrest releases.
Other substantive exploration data	Nil.
Further work	Further work is planned to evaluate exploration opportunities that extend the known mineralisation. Initial drilling conducted by Newcrest has confirmed higher grade mineralisation, broadened mineralised extents defined by prior drilling and extended the depth of observed mineralisation of the Havieron prospect. The results of drilling to date indicate the limits of mineralisation have not been closed off. Drilling programs at Havieron are ongoing, with additional drill rig(s) scheduled to commence in the Q1 FY20.

 

APPENDIX II

Drillhole Data

Havieron Prospect, Paterson, Western Australia

Reporting Criteria: Intercepts reported are Au >0.20ppm (0.2g/t Au) and minimum 20m downhole width with maximum consecutive internal dilution of 20m. Also highlighted are high grade intervals of Au >1.0ppm (1g/t Au) or Cu >5000ppm (0.5%), and minimum 10m downhole width with maximum consecutive internal dilution of 10m. Au grades are reported to two significant figures. Samples are from diamond core drilling which is PQ, HQ or NQ in diameter. Core is photographed and logged by the geology team before being cut. Half core PQ, HQ and NQ samples are prepared for assay and the remaining material is retained in the core farm for future reference. Each assay batch is submitted with duplicates and standards to monitor laboratory quality. Total depth (end of hole) rounded to 1 decimal place for reporting purposes.

Hole ID	Hole Type	Easting (m)	Northing (m)	RL (m)	Total Depth (m)	Azimuth	Dip	From (m)	To (m)	Interval (m)	Au (ppm)	Cu (pct)	Cut Off
Havieron
Greatland Gold exploration programs 2018 - Results re-calculated by Newcrest
HAD001	RC-DD	464098	7597650	258	622.9	360	-90	497	618	121	2.9	0.23	0.2g/t Au
							Incl	497	536.5	39.5	1.4	0.33	1 g/t Au
							incl	568.5	618	49.5	6.0	0.28	1 g/t Au
							incl	568.5	579.5	11	19	0.69	0.5% Cu
HAD002	RC-DD	463927	7597744	257	601.1	360	-90	437	461	24	0.4	0.03	0.2g/t Au
							and	567	601.1	34.1	0.21	0.02	0.2g/t Au
HAD003	RC-DD	464024	7597694	258	590.3	360	-90	418	439	21	3.8	0.44	0.2g/t Au
							Incl	419.5	439	19.5	4.0	0.47	1 g/t Au
							and	518	546	28	0.2	0.12	0.2g/t Au
HAD004	RC-DD	464097	7597749	257	625	360	-90	432	450	18	0.31	0.03	0.2g/t Au
							and	479	521.5	42.5	0.21	0.01	0.2g/t Au
							and	592	625	33	0.28	0.04	0.2g/t Au
HAD005	RC-DD	463898	7597649	259	821.2	90	-70	459	562	103	3.5	0.93	0.2g/t Au
							incl	462.5	531	68.5	5.1	1.2	1 g/t Au
							and	660	788	128	7.4	0.54	0.2g/t Au
							incl	663	744	81	11	0.56	1 g/t Au
HAD006	RC-DD	464094	7597602	259	838.1	360	-90	471	525	54	2.7	0.79	0.2g/t Au
							incl	471.5	497	25.5	4.1	1.4	1 g/t Au
							incl	510	525	15	2.5	0.30	1 g/t Au
							and	547.9	727	179.1	1.4	0.47	0.2g/t Au
							incl	547.9	560.8	12.9	1.7	0.48	1 g/t Au
							incl	577	604.5	27.5	1.9	1.4	1 g/t Au
							incl	617	654.5	37.5	3.8	0.44	1 g/t Au
							and	671.5	688.5	17	0.69	0.61	0.5% Cu
							and	741	765	24	0.66	0.28	0.2g/t Au
							and	810.5	833	22.5	0.23	0.20	0.2g/t Au
HAD007	RC-DD	464348	7597648	258	754.5	270	-70	468	506	38	0.53	0.22	0.2g/t Au
							and	518	551	33	0.87	0.07	0.2g/t Au
							and	602	666.5	64.5	0.34	0.16	0.2g/t Au
							incl	604	614.5	10.5	1.0	0.28	1 g/t Au
							and	721	754.5	33.5	0.41	0.14	0.2g/t Au
HAD008	RC-DD	464148	7597602	259	772.4	360	-90	426	493	67	2.0	0.91	0.2g/t Au
							incl	426.5	468	41.5	1.2	1.2	1 g/t Au
HAD009	RC-DD	464456	7597548	259	932.1	270	-74.7	755	805	50	0.23	0.21	0.2g/t Au
							and	844	902	58	0.33	0.42	0.2g/t Au
							incl	913	923.5	10.5	0.58	0.65	0.5% Cu
Newcrest exploration program - from May to June 2019
HAD006*	RC-DD	464094	7597602	259	838.1	360	-90	792	893	101	0.33	0.57	0.5% Cu
							and	844	941	97	0.48	0.26	0.2g/t Au
							incl	872	895	23	1.0	0.19	1 g/t Au
							and	1071	1083	12	3.1	0.08	1 g/t Au
							and	1122	1174	52	7.0	0.17	0.2g/t Au
							incl	1153	1170	17	21	0.39	1 g/t Au
HAD010	MR-DD	463940	7597603	260	733	90	-65	No significant result
HAD011**	MR-DD	464450	7597598	259	1275.6	270	-61	682	735	53	0.20	0.25	0.2g/t Au
							and	712	724	12	0.25	0.95	0.5% Cu
							and	754	793	39	1.1	0.82	0.5% Cu
							and	779	793	14	2.9	1.1	1 g/t Au
							and	838	886	48	0.59	0.90	0.2g/t Au
								Awaiting assays from 903.8 m

* Greatland Gold to 838.2m interval open at depth; Newcrest extended drilling from 838.2m to 1216.3m.

**Assay results pending.

 

END

 

 

DRLPGUWCMUPBUAA