Rambler's Underground Footwall Program Retu...

FOR: RAMBLER METALS & MINING PLC

TSX VENTURE SYMBOL:  RAB
AIM SYMBOL:  RMM

January 31, 2008

Rambler's Underground Footwall Program Returns Encouraging Results

LONDON, ENGLAND and BAIE VERTE, NEWFOUNDLAND AND LABRADOR--(Marketwire - Jan. 31, 2008) - Rambler Metals and
Mining plc (TSX VENTURE:RAB)(AIM:RMM) is pleased to announce the first lower footwall intersections from its
underground drilling delineation program.

- RMUG07-06 returned 17.9 meters of 1.85% copper
       Including 10.5 metres of 2.25% copper
- RMUG07-09 returned 15.1 metres of 1.51% copper
- RMUG07-10 returned 70.3 metres of 1.06% copper
       Including 13.0 metres of 1.88% copper
- RMUG08-14 returned 5.2 metres of 2.05% copper

Lower Footwall Zone (LFZ)

The upper portion of the Lower Footwall Zone historically reported copper grades of 1% with an average
thickness of 20 metres. Results from the first seven underground drill holes completed from the 740 and 1020
levels have confirmed multiple intersections of 20 metres, with grades of many of these zones approaching 1.5%
to 2% copper. Although the grades and widths are not as robust as the surface drilling results further down
plunge, these initial findings are encouraging since they exceed any of the previously reported mineralization.

Drill stations are currently developed on the 740, 1020, 1200 and 1400 levels targeting the lower footwall on a
50 metre drill spacing, which will allow the new results to be incorporated in Rambler's first NI43-101
resource estimate to be published in May 2008.

----------------------------------------------------------------
Hole           From       To   Length    Length      Cu      Au
                 (m)      (m)      (m)    (feet)     (%)   (g/T)
----------------------------------------------------------------
RMUG07-06    160.80   178.70    17.90     58.73    1.85    0.34
including    166.80   177.30    10.50     34.45    2.25    0.45

RMUG07-09    118.00   178.60    60.60    198.82    0.71    0.10
including    153.20   168.30    15.10     49.54    1.51    0.11

RMUG07-10    112.50   182.80    70.30    230.64    1.06    0.10
  including  125.10   138.10    13.00     42.65    1.88    0.20
  including  141.00   168.60    27.60     90.55    1.21    0.09

RMUG08-12    179.30   195.80    16.50     54.13    1.04    0.09
  including  186.10   194.80     8.70     28.54    1.45    0.13

RMUG08-13     48.10   132.20    84.10    275.92    0.59    0.09
  including   49.10    56.10     7.00     22.97    1.27    0.17
  including  115.20   123.20     8.00     26.25    1.55    0.17
RMUG08-13    170.10   188.40    18.30     60.04    0.98    0.06
  including  184.40   188.40     4.00     13.12    1.66    0.13

RMUG08-14     56.10    61.40     5.30     17.39    1.93    0.18
RMUG08-14    118.90   128.30     9.40     30.84    1.35    0.10
RMUG08-14    171.60   189.70    18.10     59.38    1.22    0.08
  including  172.60   179.90     7.30     23.95    1.40    0.08
  including  182.60   187.80     5.20     17.06    2.05    0.16

RMUG08-15    175.60   188.30    12.70     41.67    1.34    0.08
RMUG08-15    193.80   208.50    14.70     48.23    1.45    0.07

For more information and a complete listing of all RMM drill intersections, corresponding maps, figures and
NI43-101 compliance information please visit our website at www.ramblermines.com.

Larry Pilgrim, P.Geo and Independent Consultant comments:

"The assay results from the first seven underground drill holes specifically designed to target the footwall
zone are encouraging. The results confirm the historically reported widths with even better grades. It is
important to note that these holes tested the up dip extension of the footwall zone on the 740 and 1020 levels
and remain open up plunge. Recent and historical drilling has confirmed that the footwall zone extends down to
the 3200 level for a plunge length of 1700 meters (5,500 feet) with grades and widths increasing with depth
(see Rambler Metals and Mining Press Release dated 2nd October, 2007). The zone has not been cut off down-
plunge or up-plunge; this represents further additional drilling opportunity to add to the NI43-101 resource
estimate."

Larry Pilgrim, P.Geo. is the Qualified Person responsible for the technical content of this release and has
reviewed and approved it accordingly. Mr. Pilgrim is an independent consultant contracted by Rambler Metals and
Mining plc.

All tonnes are dry metric tonnes.

Drill intercepts quoted are core lengths; true widths for the footwall zone are estimated to be 90% to 95% of
the intersected core lengths. Analytical results for Rambler core in this press release were determined at
Eastern Analytical, Springdale, NL. Samples are then shipped by courier to Activation Laboratories Ltd.,
Ancaster Ontario, where a 34 element ICP analysis and gold fire assay are performed.

National Instrument 43-101 compliance information regarding sampling and analytical protocols pertaining to the
Rambler Project can be accessed via the following link: http://www.ramblermines.com.

FOR FURTHER INFORMATION PLEASE CONTACT:

Rambler Metals and Mining Canada Limited
George Ogilvie, P.Eng.
VP & COO
[phone]

OR

Rambler Metals & Mining Plc
Leslie Little
Company Secretary
[phone]
Website: www.ramblermines.com

OR

Seymour Pierce Limited
David Newton
[phone]

OR

Pelham Public Relations
Chelsea Hayes
[phone]

Rambler Metals & Mining Plc