11 April 2017
SolGold plc
("SolGold" or the "Company")
Cascabel Exploration Update
Hole 22 extends the Alpala Central high grade core
approximately 200m closer to surface.
The Board of SolGold (AIM code: SOLG) is pleased to provide an update on Hole 22 at the Company's Cascabel copper-gold porphyry project in Ecuador.
HIGHLIGHTS:
Ø Hole 22 extends the Alpala Central high-grade core approximately 200m closer to surface.
Ø Final results return:
· 730m @ 0.52 % copper and 0.23 g/t gold from 446m (at 0.30% CuEq cut-off), including:
· 384m @ 0.65 % copper and 0.34 g/t gold from 770m (at 0.50% CuEq cut-off), and
· 100m @ 1.10 % copper and 0.57 g/t gold from 896m (at 0.70% CuEq cut-off).
Ø Hole 23R, 24, and 25 update planned before Easter.
Ø SolGold's current exploration team makes discovery of the growing Alpala Deposit for 50km2 of geophysical and geochemical surveys, 34,000m of diamond drilling, and USD43M expenditure.
References to figures and tables relate to the version of this release on the Company's website (www.solgold.com.au) or visible in PDF format by clicking the link below:
http://www.rns-pdf.londonstockexchange.com/rns/1922C_-2017-4-11.pdf
FURTHER INFORMATION:
The Cascabel Project is located on the gold-rich northern section of the prolific Andean Copper belt renowned as the production base for nearly half of the world's copper, (Figure 1). The project area hosts mineralisation of Eocene age, the same age as numerous Tier 1 deposits along the Andean Copper Belt in Chile and Peru to the south. The project base is located at Rocafuerte, in northern Ecuador, approximately three hours drive north of Quito, close to water, power supply and Pacific ports (Figure 2). SolGold holds an 85% interest in ENSA (Exploraciones Novomining S.A.) which holds 100% of the Cascabel tenement.
Fifteen individual targets have been defined at Cascabel. SolGold has successfully drill tested three of the fifteen targets, being Alpala Central, Alpala Northwest, and Hematite Hill. Drill testing of a fourth target, at Alpala Southeast is currently under way (Hole 24) (Figure 3). The deposit at Alpala continues to grow with each new drill hole. Current drilling focusses on defining the geometry of the growing Alpala deposit, which is open in virtually all directions. Over 34,000m of drilling has been completed to date, and the arrival of Rigs 4, 5, 6 and 7 over the coming two quarters will see drill testing expanding to Alpala East, Alpala West, Trivinio and Aguinaga by mid-year. The drilling program expands towards eight drilling rigs by year end, which will also see drill testing of the Tandayama-America prospect. Drill hole locations showing completed drilling and current holes 23R, 24, and 25 are shown in Figure 4.
Hole 21 (CSD-17-021), situated approximately 250m along strike to the southeast of Holes 16 (856m @ 0.80% Cu, 1.04g/t Au), was completed to a depth of 1619.2m on 17 March 2017. Hole 21 intersected significant copper sulphide mineralisation from around 685m to 1610m depth, reported on 4th April as a 925m interval showing an average of >1.5 volume-percent chalcopyrite, based on visual logging estimates. This includes a zone that averages >2.0 volume-percent chalcopyrite over a down-hole length of approximately 490m.
Assay results for Hole 21 are being finalised and are expected in the coming week. Selected examples of mineralisation encountered in Hole 21 are shown in Figure 5.
Hole 22 (CSD-17-022) was completed to a depth of 1311.2m on 5th March 2017 testing approximately 200m up-trend of Hole 19 from the same drill site. Hole 22 extends the Alpala Central high grade core approximately 200m shallower. Final results returned:
· 730m @ 0.52 % copper and 0.23 g/t gold from 446m (at 0.30% CuEq cut-off), including:
· 384m @ 0.65 % copper and 0.34 g/t gold from 770m (at 0.50% CuEq cut-off), and
· 100m @ 1.10 % copper and 0.57 g/t gold from 896m (at 0.70% CuEq cut-off).
The position of Hole 22 is shown in cross-section A-A' in Figure 6. Selected examples of mineralisation encountered in Hole 22 are shown in Figure 7.
Holes 23R, 24, and 25 are in progress at current depths of 579.1m, 868.7m, and 847.0m respectively. A detailed update on the progress of these exciting holes, testing both depth and strike extensions to the southeast of Alpala, is planned later this week.
OUTLOOK
Upgrade and expansion of site facilities are well underway at Cascabel as the project continues to expand towards 7 rigs by October and 10 rigs next year. The geology team have yet to define the extents of the Alpala porphyry system, and the deposit remains open in most directions, continuing to grow with each new drill hole. An aggressive drill program, producing approximately 90,000m of diamond drill core per annum from early 2018 is planned to delineate the system limits along the greater Alpala trend prior to a maiden resource statement, and to test the other multiple targets within the concession. An increasing understanding of the deposit is now leading to much larger step-outs in drilling as SolGold directs its program towards the copper and gold at a prognosed large and rich heart of the Alpala system.
Qualified Person:
Information in this report relating to the exploration results is based on data reviewed by Mr Nicholas Mather (B.Sc. Hons Geol.), the Chief Executive Officer of the Company. Mr Mather is a Fellow of the Australasian Institute of Mining and Metallurgy who has in excess of 25 years' experience in mineral exploration and is a Qualified Person under the AIM Rules. Mr Mather consents to the inclusion of the information in the form and context in which it appears.
By order of the Board
Karl Schlobohm
Company Secretary
CONTACTS
Mr Nicholas Mather Tel: +61 (0) 7 3303 0665
SolGold Plc (Executive Director) +61 (0) 417 880 448
Mr Karl Schlobohm Tel: +61 (0) 7 3303 0661
SolGold Plc (Company Secretary)
Mr Ewan Leggat / Mr Richard Morrison Tel: +44 (0) 20 3470 0470
SP Angel Corporate Finance LLP (NOMAD and Broker)
Follow us on twitter @SolGold_plc
NOTES TO EDITORS
SolGold is a Brisbane, Australia based, AIM‐listed (SOLG) copper gold exploration and future development company with assets in Ecuador, Solomon Islands and Australia. SolGold's primary objective is to discover and define world‐class copper‐gold deposits. The Board and Management Team have substantial vested interests in the success of the Company as shareholders as well as strong track records in the areas of exploration, mine appraisal and development, investment, finance and law. SolGold's experience is augmented by state of the art geophysical and modelling techniques and the guidance of porphyry copper and gold expert Dr Steve Garwin.
SolGold was shortlisted as a nominee for the Mining Journal Explorer Achievement Award for 2016. The Company announced USD54m in capital raisings in September 2016 involving Maxit Capital LP, Newcrest International Ltd and DGR Global Ltd, all undertaken at substantial premiums to previous raisings and SolGold has (at March 2017) circa USD35 million in available cash to continue the exploration and development of its flagship Cascabel Project.
Coincident with those capital raisings, Mr Scott Caldwell (CEO of TSX-listed Guyana Goldfields Inc) joined the SolGold Board on 9 September 2016. Mr Caldwell is a mining engineer with over 30 years of experience building and operating gold and base metal mines worldwide, including USA, Canada, Russia, Zimbabwe, Chile and Indonesia and was in 2016 recognised as CEO of the year for South-American resource companies.
Mr Craig Jones also joined the SolGold Board on 3 March 2017, nominated to the Board of SolGold by Newcrest Mining, a 10% shareholder in SolGold. Mr Jones is a Mechanical Engineer and is currently the Executive General Manager Wafi-Golpu (Newcrest-Harmony MMJV). He has held various senior management and executive roles within the Newcrest Group, including General Manager Projects, General Manager Cadia Valley Operations, Executive General Manager Projects and Asset Management, Executive General Manager Australian and Indonesian Operations, Executive General Manager Australian Operations and Projects, and Executive General Manager Cadia and Morobe Mining Joint Venture. Prior to joining Newcrest, Mr Jones worked for Rio Tinto.
Cascabel, SolGold's 85% owned world class flagship copper‐gold porphyry project, is located in northern Ecuador on the under‐explored northern section of the richly endowed Andean Copper Belt. SolGold owns 85% of Exploraciones Novomining S.A. ("ENSA") and approximately 11% of TSX‐V‐listed Cornerstone Capital Resources ("Cornerstone"), which holds the remaining 15% of ENSA, the Ecuadorian registered company which holds 100% of the Cascabel concession.
The investment by Newcrest into 10% of SolGold, and investment into SolGold by Guyana Goldfields, Maxit Capital and its clients, endorses Ecuador as an exploration and mining destination, the management team at SolGold, the dimension, size and scale of the growing Alpala, and the prospectivity of Cascabel and its multiple targets. The gold endowment, location, infrastructure, logistics are important competitive advantages offered by the project.
To date SolGold has completed geological mapping, soil sampling, rock saw channel sampling, geochemical and spectral alteration mapping over 25km2, along with an additional 9km2 of Induced Polarisation and 14km2 Magnetotelluric "Orion" surveys over the Alpala cluster and Aguinaga targets.
SolGold has completed over 34,000m of drilling and expended over USD43M on the program, corporate costs and investments into Cornerstone. This has been accomplished without lost time injury or environmental incident, employing a workforce of up to 176 Ecuadoreans workers and geoscientists and 6 expatriate Australian geoscientists. The results of 26 holes drilled (including re-drilled holes) and assayed to date have produced some of the greatest drill hole intercepts in porphyry copper-gold exploration history including Hole 12 (CSD-16-012) returning 1002m grading 0.76 % copper and 0.77 g/t gold. The average grade of all metres drilled to date on the project boasts 0.32 % copper and 0.27 g/t gold. Intensive diamond drilling is planned for the next 12 months with 10 drill rigs expected to be operational by years' end, targeting over 90,000m of drilling per annum.
Cascabel is characterised by fifteen (15) identified targets, world class drilling intersections over 1km in length at potentially economic grades, and high copper and gold grades in richer sections, as well as logistic advantages in location, elevation, water supply, proximity to roads, port and power services; and a progressive legislative approach to resource development in Ecuador. To date, SolGold has drill tested 3 of the 15 targets, being Alpala Central, Alpala Northwest, and Hematite Hill. Currently drill testing of the Alpala Southeast target is underway.
The Alpala deposit is open in multiple directions and the mineralised corridor marked for drill testing of the greater Alpala cluster occurs over a 2.2km strike length from Trivinio in the northwest to Cristal in the southeast. The mineralised corridor is known to be prospective over approximately 700m width. High priority targets within the Alpala cluster, at Moran approximately 700m to the north, and at Aguinaga approximately 2.3km north east, are closely modelled by 3D MVI magnetic signatures that currently encompass over 15Bt of magnetic rock. Based on a strong spatial and genetic relationship between copper sulphides and magnetite, this body of magnetic rock is considered to be highly prospective for significant copper and gold mineralisation, and requires drill testing.
SolGold is focussing on extending the dimensions of the Alpala deposit including Hematite Hill, Alpala South East, Cristal, Alpala Northwest and Trivinio before completing a resource statement and drill testing of the other key targets within the Cascabel concession at Alpala West, Carmen, Alpala East, Moran, Aguinaga, Tandayama-America, Parambas, and Chinambicito.
The Company is currently planning further metallurgical testing and completion of an independent Pre-Feasibility Study at Cascabel. SolGold is investigating both high tonnage open cut and underground block caving operations, as well as a high grade / low tonnage initial underground development towards the economic development of the copper gold deposit/s at Cascabel.
Drill hole intercepts are calculated using a data aggregation method, defined by copper equivalent cut-off grades and reported with up to 10m internal dilution, excluding bridging to a single sample. Copper equivalent grades are calculated using a gold conversion factor of 0.63, determined using an updated copper price of USD3.00/pound and an updated gold price of USD1300/ounce. True width of down hole intersections are estimated to be approximately 25-50%.
Following a comprehensive review of the geology and prospectivity of Ecuador, SolGold and its subsidiaries have also applied for additional exploration licences in Ecuador over a number of promising porphyry copper gold targets throughout the Country. SolGold is negotiating external funding options which will provide the Company with the ability to have some of these projects fully funded by a third party while focussing on Cascabel.
In Queensland, Australia the Company is evaluating the future exploration plans for the Mt Perry, Rannes and Normanby projects, with drill testing of the Normanby project planned for the coming quarter. Joint venture agreements are being investigated for a joint venture partner to commit funds and carry out exploration to earn an interest in the tenements.
SolGold retains interests in its original theatre of operations, Solomon Islands in the South West Pacific, where the 100% owned, but as yet undrilled, Kuma prospect on the island of Guadalcanal exhibits surface lithocap characteristics which are traditionally indicative of a large metal rich copper gold intrusive porphyry system. SolGold intends in the future to apply intellectual property and experience developed in Ecuador to target additional world class copper gold porphyries at Kuma and other targets in Ecuador and Argentina.
SolGold is based in Brisbane, Queensland, Australia. The Company listed on London's AIM Market in 2006, under the AIM code 'SOLG' and currently has a total of 1,431,166,605 ordinary shares issued, together with 33,975,884 options exercisable at 28p and 12,875,884 options exercisable at 14p.
CAUTIONARY NOTICE
This news release may contain certain statements and expressions of belief, expectation or opinion which are forward looking statements, and which relate, inter alia, to the Company's proposed strategy, plans and objectives or to the expectations or intentions of the Company's directors. Such forward-looking statements involve known and unknown risks, uncertainties and other important factors beyond the control of the Company that could cause the actual performance or achievements of the Company to be materially different from such forward-looking statements. Accordingly, you should not rely on any forward-looking statements and save as required by the AIM Rules for Companies or by law, the Company does not accept any obligation to disseminate any updates or revisions to such forward-looking statements.