Regional Exploration Update - Porvenir

RNS Number : 5460U

SolGold PLC

06 December 2021

 

06 December 2021

SolGold plc

("SolGold" or the "Company")

Hole 19 at Porvenir's Cacharposa returns one of the best intersections to date

The Board of Directors of SolGold (LSE & TSX: SOLG) is pleased to provide an update on the Regional Exploration programme in Ecuador at the Porvenir held by Green Rock Resources S.A., a 100% owned and unencumbered subsidiary of SolGold.

HIGHLIGHTS:

Ø Drill holes 14 - 22 at Cacharposa have intersected further significant copper and gold mineralisation.

Ø Hole 19 returned one of the best intersections to date with 722m @ 0.66% copper equivalent ("CuEq") ^[1] from surface.

Ø Significant intersections include:

· PDH-21-019: 722m @ 0.66% CuEq from surface including 118m @ 1.13% CuEq from 12m

· PDH-21-018: 124m @ 0.76% CuEq from 478m

· PDH-21-016: 140m @ 0.47% CuEq from 408m

· PDH-21-014: 132m @ 0.44% CuEq from 756m

Ø Recent drilling results continue to delineate a near surface, large, mineralised porphyry system at Cacharposa that remains open.

Ø Work is advancing on a maiden Mineral Resource Estimate ("MRE") for the Cacharposa deposit that is expected later this month.

Ø Drilling is ongoing at Porvenir with three drill rigs on site testing mineralisation at Cacharposa and surrounding targets.

SolGold's Executive Board Member and Head of Exploration, Mr Jason Ward, commented on today's update at Porvenir:

"Results from Cacharposa continue to improve with Hole 19 representing one of the best intersections to date at the Porvenir project. Mineralisation in this hole commenced from surface and attests to the economic potential of this project. Cacharposa continues to grow and with numerous other nearby mineralised targets identified, we believe the Porvenir project has the potential to become a Tier 1 copper - gold porphyry camp."

References to figures relate to the version visible in PDF format by clicking the link below:

http://www.rns-pdf.londonstockexchange.com/rns/5460U_1-2021-12-3.pdf

FURTHER INFORMATION

Porvenir Project: Cacharposa Target

The Porvenir project is located approximately 100km north of the Peruvian border ( Figure 1 ), in southern Ecuador and approximately 100km south of the 9.48 Moz Au Fruta Del Norte deposit ^[2]. The Company's Porvenir project is held by Green Rock Resources S.A., a 100% owned and unencumbered subsidiary of SolGold.

The Cacharposa porphyry copper-gold target is part of a 1,700m long northerly-trending mineralised corridor, up to 1,000m wide. The target is characterised by coincident Cu, Mo, Au and Cu/Zn soil anomalies that lie central to a zone of Mn-depletion in soil. Reduced-to-the-pole ("RTP") magnetics exhibit a central magnetic high surrounded by an annular magnetic low. These characteristics together are typical of numerous significant porphyry deposits globally, several of which have become mines.

Drill holes 14-22 at Cacharposa intersected significant copper and gold mineralisation, including a significant intercept of 722m @ 0.66% CuEq (0.52% Cu, 0.23g/t Au) representing close to 480m%^[3] CuEq  in hole 19 ( Figure 2 & 3 ). Selected highlights of final drill hole assays received from Holes 14-19 include:

· PDH-21-014: 132m @ 0.44% CuEq from 756m

· PDH-21-016: 140m @ 0.47% CuEq from 408m

· PDH-21-018: 124m @ 0.76% CuEq from 478m

· PDH-21-019: 722m @ 0.66% CuEq from surface including 118m @ 1.13% CuEq from 12m

· PDH-21-020: 122m @ 0.44% CuEq from 8m

· PDH-21-021: 166m @ 0.38% CuEq from 182m

Significant intersections from final assays in drill holes 14-22 at Cacharposa are shown in Table 1 .

The interpreted orientation of the Cacharposa intrusive complex and its associated porphyry copper-gold mineralisation is subvertical, dipping approximately 75 degrees to the northwest. The true width of down-hole intersections reported are therefore expected to be approximately 55-75% of the down-hole lengths, depending on the orientation of any given drill hole.

Three drilling rigs are currently operating at Porvenir continuing to delineate the extents of mineralisation at Cacharposa along with testing other nearby mineralised targets at Mula Muerte and Viño at the Porvenir project.

Drilling of hole 26 will commence shortly at Cacharposa and assays from completed holes 23-25 are pending.

Work is advancing on a maiden MRE for Cacharposa expected later this month with internal preliminary estimates indicative of a significant prospective resource that appears amenable to bulk surface mining methods.

^[1]   Copper equivalency factor of 0.632 (whereby CuEq = Cu + Au x 0.632) is based on third party metal price research, forecasting of Cu and Au prices, and a cost structure from mining studies data available from a similar deposit. Costs include mining, processing and general and administration (G&A). Net Smelter Return (NSR) includes metallurgical recoveries and off-site realisation (TCRC) including royalties and utilising metal prices of Cu at US$3.30/lb and Au at US$1,700/oz.

^[2] Fruta Del Norte Mineral Resources, inclusive of Mineral Reserves. https://lundingold.com/en/fruta-del-norte/reserves-and-resources .

^[3]   Metre percent Copper Equivalent (m% CuEq) = interval length (m) x grade of the entire interval (CuEq%). M% CuEq calculation provides a standardised measure of comparing drilling intercepts by calculating an analogous interval length that would hold a CuEq% grade of 1% for each metre within the selected interval.

Figure 1 : Location Map. SolGold's Porvenir Project in southern Ecuador

Table 1 : Selected significant intercepts achieved at the Cacharposa Deposit in Holes 14 - 22.

Figure 2 : Cacharposa   Drilling Plan at Porvenir showing selected highlights of drilling results to date, over topography and current 3D Numerical Models at > 0.1%, >0.4% and >0.7% CuEq cut-off grades.

Figure 3 : Central   Cross-section A-A' looking north-northeast with window thickness of 100m and showing assay results received to date over current 3D Numerical Modelling at > 0.1%, >0.4% and >0.7% CuEq cut-off grades.

Certain information contained in this announcement would have been deemed inside information.

Qualified Person:

Information in this report relating to the exploration results is based on data reviewed by Mr Jason Ward ((CP) B.Sc. Geol.), the Chief Geologist of the Company. Mr Ward is a Fellow of the Australasian Institute of Mining and Metallurgy, holds the designation FAusIMM (CP), and has in excess of 20 years' experience in mineral exploration and is a Qualified Person for the purposes of the relevant LSE and TSX Rules. Mr Ward consents to the inclusion of the information in the form and context in which it appears.

By order of the Board

Dennis Wilkins

Company Secretary

CONTACTS

Dennis Wilkins SolGold Plc (Company Secretary) [e-mail]	Tel: [phone]
Ingo Hofmaier SolGold Plc (Acting CFO)   [e-mail]	Tel: [phone]
Fawzi Hanano / Lia Abady SolGold Plc (Investors / Communication) [e-mail] / [e-mail]	Tel: [phone]
Tavistock (Media)   Jos Simson/Gareth Tredway	Tel: [phone]

Follow us on twitter @SolGold_plc

ABOUT SOLGOLD

SolGold is a leading resources company focussed on the discovery, definition and development of world-class copper and gold deposits. In 2018, SolGold's management team was recognised by the "Mines and Money" Forum as an example of excellence in the industry and continues to strive to deliver objectives efficiently and in the interests of shareholders. SolGold is aggressively exploring the length and breadth of this highly prospective and gold-rich section of the Andean Copper Belt which is currently responsible for c40% of global mined copper production.

The Company operates with transparency and in accordance with international best practices. SolGold is committed to delivering value to its shareholders, while simultaneously providing economic and social benefits to impacted communities, fostering a healthy and safe workplace and minimizing the environmental impact.

Dedicated stakeholders

SolGold employs a staff of over 800 employees of whom 98% are Ecuadorean. This is expected to grow as the operations expand at Alpala, and in Ecuador generally. SolGold focusses its operations to be safe, reliable and environmentally responsible and maintains close relationships with its local communities. SolGold has engaged an increasingly skilled, refined and experienced team of geoscientists using state of the art geophysical and geochemical modelling applied to an extensive database to enable the delivery of ore grade intersections from nearly every drill hole at Alpala. SolGold has over 80 geologists on the ground in Ecuador exploring for economic copper and gold deposits.

About Cascabel and Alpala

The Alpala deposit is the main target in the Cascabel concession, located on the northern section of the heavily endowed Andean Copper Belt, the entirety of which is renowned as the base for nearly half of the world's copper production. The project area hosts mineralisation of Eocene age, the same age as numerous Tier 1 deposits along the Andean Copper Belt in Chile and Peru to the south. The project base is located at Rocafuerte within the Cascabel concession in northern Ecuador, an approximately three-hour drive on sealed highway north of the capital Quito, close to water, power supply and Pacific ports.

Having fulfilled its earn-in requirements, SolGold is a registered shareholder with an unencumbered legal and beneficial 85% interest in ENSA (Exploraciones Novomining S.A.) which holds 100% of the Cascabel concession covering approximately 50km². The junior equity owner in ENSA is required to repay 15% of costs since SolGold's earn in was completed, from 90% of its share of distribution of earnings or dividends from ENSA or the Cascabel concession. It is also required to contribute to development or be diluted, and if its interest falls below 10%, it shall reduce to a 0.5% NSR royalty which SolGold may acquire for US$3.5million.

SolGold's Regional Exploration Drive

SolGold is using its successful and cost-efficient blueprint established at Alpala, and Cascabel generally, to explore for additional world class copper and gold projects across Ecuador. SolGold is a large and active concessionaire in Ecuador.

The Company wholly owns four other subsidiaries active throughout the country that are now focussed on a number of high priority copper and gold resource targets, several of which the Company believes have the potential, subject to resource definition and feasibility, to be developed in close succession or even on a more accelerated basis compared to Alpala. 

SolGold is listed on the London Stock Exchange and Toronto Stock Exchange (LSE/TSX: SOLG). The Company has on issue a total of 2,293,816,433 fully paid ordinary shares and 34,250,000 share options.

Quality Assurance / Quality Control on Sample Collection, Security and Assaying

SolGold operates according to its rigorous Quality Assurance and Quality Control (QA/QC) protocol, which is consistent with industry best practices.

Primary sample collection involves secure transport from SolGold's concessions in Ecuador, to the ALS certified sample preparation facility in Quito, Ecuador. Samples are then air freighted from Quito to the ALS certified laboratory in Lima, Peru where the assaying of drill core, channel samples, rock chips and soil samples is undertaken. SolGold utilises ALS certified laboratories in Canada and Australia for the analysis of metallurgical samples.

Samples are prepared and analysed using 100g 4-Acid digest ICP with MS finish for 48 elements on a 0.25g aliquot (ME-MS61). Laboratory performance is routinely monitored using umpire assays, check batches and inter-laboratory comparisons between ALS certified laboratory in Lima and the ACME certified laboratory in Cuenca, Ecuador.

In order to monitor the ongoing quality of its analytical database, SolGold's QA/QC protocol encompasses standard sampling methodologies, including the insertion of certified powder blanks, coarse chip blanks, standards, pulp duplicates and field duplicates. The blanks and standards are Certified Reference Materials supplied by Ore Research and Exploration, Australia.

SolGold's QA/QC protocol also monitors the ongoing quality of its analytical database. The Company's protocol involves Independent data validation of the digital analytical database including search for sample overlaps, duplicate or absent samples as well as anomalous assay and survey results. These are routinely performed ahead of Mineral Resource Estimates and Feasibility Studies. No material QA/QC issues have been identified with respect to sample collection, security and assaying.

Reviews of the sample preparation, chain of custody, data security procedures and assaying methods used by SolGold confirm that they are consistent with industry best practices and all results stated in this announcement have passed SolGold's QA/QC protocol.

The data aggregation method for calculating Copper Equivalent (CuEq) for down-hole drilling intercepts and rock-saw channel sampling intervals are reported using copper equivalent (CuEq) cut-off grades with up to 10m internal dilution, excluding bridging to a single sample and with minimum intersection length of 50m.

Copper Equivalent is currently calculated (assuming 100% recovery of copper and gold) using a Gold Conversion Factor of 0.632 (whereby CuEq = Cu + Au x 0.632) is based on third party metal price research, forecasting of Cu and Au prices, and a cost structure from mining studies data available from a similar deposit.  Costs include mining, processing and general and administration (G&A). Net Smelter Return (NSR) includes metallurgical recoveries and off-site realisation (TCRC) including royalties and utilising metal prices of Cu at US$3.30/lb and Au at US$1,700/oz.

See www.solgold.com.au for more information. Follow us on twitter @SolGold plc

CAUTIONARY NOTICE

News releases, presentations and public commentary made by SolGold plc (the "Company") and its Officers may contain certain statements and expressions of belief, expectation or opinion which are forward looking statements, and which relate, inter alia, to interpretations of exploration results to date and the Company's proposed strategy, plans and objectives or to the expectations or intentions of the Company's Directors, including the plan for developing the Project currently being studied as well as the expectations of the Company as to the forward price of copper.  Such forward-looking and interpretative statements involve known and unknown risks, uncertainties and other important factors beyond the control of the Company that could cause the actual performance or achievements of the Company to be materially different from such interpretations and forward-looking statements.

Accordingly, the reader should not rely on any interpretations or forward-looking statements; and save as required by the exchange rules of the TSX and LSE or by applicable laws, the Company does not accept any obligation to disseminate any updates or revisions to such interpretations or forward-looking statements.  The Company may reinterpret results to date as the status of its assets and projects changes with time expenditure, metals prices and other affecting circumstances.

This release may contain "forward‑looking information" within the meaning of applicable Canadian securities legislation.  Forward‑looking information includes, but is not limited to, statements regarding the Company's plans for developing its properties.  Generally, forward‑looking information can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". 

Forward‑looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward‑looking information, including but not limited to: transaction risks; general business, economic, competitive, political and social uncertainties; future prices of mineral prices; accidents, labour disputes and shortages and other risks of the mining industry.  Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended.  There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements.  Factors that could cause actual results to differ materially from such  forward-looking information include, but are not limited to, risks relating to the ability of exploration activities (including assay results) to accurately predict mineralization; errors in management's geological modelling and/or mine development plan; capital and operating costs varying significantly from estimates; the preliminary nature of visual assessments; delays in obtaining or failures to obtain required governmental, environmental or other required approvals; uncertainties relating to the availability and costs of financing needed in the future; changes in equity markets; inflation; the global economic climate; fluctuations in commodity prices; the ability of the Company to complete further exploration activities, including drilling; delays in the development of projects; environmental risks; community and non-governmental actions; other risks involved in the mineral exploration and development industry; the ability of the Company to retain its key management employees and skilled and experienced personnel; and those risks set out in the Company's public documents filed on SEDAR at www.sedar.com .  Accordingly, readers should not place undue reliance on forward‑looking information. The Company does not undertake to update any forward-looking information, except in accordance with applicable securities laws.

The Company and its officers do not endorse, or reject or otherwise comment on the conclusions, interpretations or views expressed in press articles or third-party analysis, and where possible aims to circulate all available material on its website.

 

END

 

 

DRLTJBBTMTIMBRB