Drilling Report

14th February 2007

                           Rambler Continues to Encounter High-grade Copper in Multiple Zones

London,  England & Baie Verte, Newfoundland and Labrador - Rambler Metals and Mining plc (TSXV:RAB, AIM:RMM) is  pleased
to  announce  significant new results from its ongoing drilling program at its Rambler copper-gold  project  located  in
Newfoundland and Labrador.

These  new  results have been identified from all three target deposits.  Of particular significance are new high  grade
intersections from the newly discovered Upper Ming Footwall Deposit and the 1800 level area of the Ming West Deposit.

-       RM06-04l returns 16.4 feet of 5.20% copper including 6.56 feet of 10.70 % copper
-       RM07-18 returns 8.53 feet of 17.65 % copper with 3.5 g/T gold

The  Rambler project covers the historic Ming and Ming West copper-gold mines on the Baie Verte Peninsula on the  island
of  Newfoundland.  Exploration work is focused on evaluating and delineating the Ming Footwall deposit and the  recently
discovered  Upper Ming Footwall deposit as well as seeking extensions to both the historic Ming and Ming West  deposits.
All of these deposits are located within reasonable proximity to the historic underground mine infrastructure, which the
company is about to begin dewatering and rehabilitating.

Upper Ming Footwall Deposit
The  Upper Ming Footwall Deposit is a new high-grade discovery that sits stratigraphically between the Ming Deposit  and
the  Ming  Footwall Zone.  It ranges between 6.0 and 14.4 metres in thickness and is open both across  strike  and  down
plunge.   The  results  reported below are from a hole located 50 metres down-plunge from the three previously  reported
holes that intersected the deposit.

     Hole          From           To         Length       Length       Cu        Au
                    (m)          (m)           (m)        (feet)      (%)      (ppb)
RM06-04l          996.00       1001.00        5.00        16.40       5.20      310
including         996.00        998.00        2.00         6.56      10.70      586

Ming and Ming West Deposits
The  historical  mine  production  from the Rambler Project originates from the Ming  and  Ming  West  massive  sulphide
deposits.   These  parallel, plunging deposits are on the same stratigraphic horizon and separated  by  250  metres.   A
decline  that  extended  to 820 vertical meters and a shaft that extended to 650 vertical meters facilitated  historical
production.   At the time of mine closure it was estimated that 350,000 tons of 3.4% Cu and 1.7 g/T Au remained  in  the
Ming  Deposit  and that 55,000 tons of 6.5% Cu and 1.1 g/T Au remained in the Ming West Deposit (near the  1800  level),
adjacent to the former property boundary.  These estimates are historical in nature and are not NI-43-101 compliant  and
therefore should not be relied upon (see notes below).

The  high-grade drill intersection reported below is from the Ming West Deposit.  The intersection is located beyond the
former property boundary and is approximately 50 metres down plunge from previous testing of the deposit.

     Hole          From         To        Length      Length        Cu          Au
                    (m)         (m)         (m)       (feet)        (%)        (ppb)
RM07-18           600.50      603.10       2.60        8.53        17.65        3545

A  complete  listing  of  RMM drill intersections to date, as well as corresponding maps and figures  can  be  found  at
www.ramblermines.com.

Ming Footwall Zone
The  Ming Footwall Zone (MFZ) is located approximately 100 metres below and generally parallel to the historic Ming Mine
workings.   To date, the deposit has been identified along a 1500 metre plunge length and has an apparent width of 50 to
150  metres.   The deposit thickness generally exceeds 20 metres, up to 70 metres and is being evaluated as a  potential
low-cost, bulk underground mining operation.  New drill results from intersections of the MFZ are as follows:

     Hole             From          To          Length       Length     Cu         Au
                       (m)          (m)           (m)        (feet)     (%)       (ppb)
RM06-04j             1054.70      1059.60         4.90       16.08     2.13        105
RM06-04j             1063.80      1071.90         8.10       26.57     2.00         72
RM06-04j             1084.00      1108.00        24.00       78.74     1.88        101
including            1084.00      1096.00        12.00       39.37     2.33        171

RM06-04k             1062.50      1088.00        25.50       83.66     1.81        102
including            1062.50      1074.50        12.00       39.37     2.24        149

RM06-04m             1077.70      1098.80        21.10       69.23     1.81         86
including            1077.70      1085.50         7.80       25.59     2.31         71
RM06-04m             1116.50      1136.70        20.20       66.27     2.01         71
RM06-04m             1137.90      1148.20        10.30       33.79     1.91         90
including            1139.50      1148.20         8.70       28.54     2.09        102
RM06-04m             1154.80      1163.50         8.70       28.54     2.29        131
RM06-04m             1176.00      1213.50        37.50      123.03     1.32         75
including            1176.00      1189.50        13.50       44.29     1.94         98
including            1201.50      1213.50        12.00       39.37     1.55        103

RM06-17a              652.25       658.25         6.00       19.69     3.61        444
RM06-17a              765.00       793.50        28.50       93.50     1.63        128
including             769.50       780.00        10.50       34.45     2.44        148

RM06-17d              792.90       797.67         4.77       15.65     2.75        352

RM06-17e              729.00       734.15         5.15       16.90     2.01        284

Delineation  and  exploration  drilling continues at the Rambler Project employing two drill  rigs  both  of  which  are
successfully utilizing directional drilling technology. As underground dewatering and rehabilitation advances throughout
the  year a concurrent program of underground drilling will be initiated.  The underground drilling program will greatly
increase  the  rate  of delineation drilling of the deposits which in turn will allow Rambler to more  quickly  evaluate
potential mining scenarios.

George Ogilvie, P.Eng.
VP & COO
Rambler Metals and Mining
Canada Limited
...

Leslie Little, Company Secretary
Rambler Metals & Mining Plc
Tel No: 020-7661-8104

Mark Graves, P.Geo. is the Qualified Person responsible for the technical content of this release Mr. Graves is an
employee of Rambler..

Drill intercepts quoted are core lengths; true widths are estimated to be 90% to 95% of the intersected core lengths.
National Instrument 43-101 compliance information regarding sampling and analytical protocols pertaining to the Rambler
Project can be accessed via the following link: http://www.ramblermines.com

Mineral exploration on the Rambler property is being conducted by RMM personnel.

All  drill  holes  have  produced  47.6 millimetre diameter (1.875-inch) NQ diamond  drill  core.   The  drill  core  is
descriptively logged on site, aligned, marked for sampling and then split in half, longitudinally, using a  diamond  saw
blade.   One-half of the core is preserved in core boxes for future reference. The samples comprising the other half  of
the  core  are  bagged, sealed and delivered directly to the analytical laboratory by RMM personnel.  Base metal-bearing
samples  are  nominally  1 metre to 1.8 metres (3.28 to 5.90 feet) in length except where specific  geologic  parameters
require  that a smaller interval be sampled.  Samples with suspected precious metal content are nominally one  metre  or
less, depending on the geological circumstances.

The  sawed  samples are delivered directly to Eastern Analytical Limited in Springdale, Newfoundland  by  RMM  personnel
where  they  are  dried, crushed and pulped.  Samples are crushed to approximately -10 mesh and  split  using  a  riffle
splitter  to approximately 300 grams.  The sample split is pulverized using a ring mill to approximately 98%  minus  150
mesh.  In addition to regular samples, blank samples and quarter-split samples are also submitted for crushing/pulping.

The  sample pulps are picked up directly at Eastern Analytical Limited by RMM personnel and returned to the project site
at  which  point  analytical standard samples and duplicate samples are inserted into the sample  stream.   The  quality
control procedures utilized by RMM have been approved by Scott Wilson Roscoe Postle Associates Inc. (Scott Wilson  RPA).
Their review was the basis of a technical report written by Scott Wilson RPA on the Rambler project conforming to NI 43-
101 Standards of Disclosure for Mineral Projects.   All sample rejects are also retrieved from Eastern Analytical by RMM
personnel and securely stored by RMM.

The  sample pulps are shipped by courier to Activation Laboratories Ltd. in Ancaster, Ontario for analysis.   A  typical
analysis consists of three, industry-standard components:

(1)  an aqua regia digestion followed by a 34 element ICP analysis,
(2)  a gold assay consisting of a one assay ton fire assay with finish by atomic absorption, and
(3)  an  assay  of  specific base metals by aqua regia digestion followed by atomic absorption spectroscopy  for  those
elements which exceed the limits of ICP accuracy.

Check  assays  for the Rambler project are being conducted by ALS Chemex, using industry-standard techniques  posted  on
their website.  Check assays are also routinely performed at Eastern Analytical Limited.  The drill program and sampling
protocol  are  being  supervised  by Mark Graves, P.Geo.; a Qualified Person as defined under  the  Canadian  Securities
Administrators' National Instrument 43-101.

Historical Estimates
For  the Ming Mine, the most comprehensive historical estimates available derive from a review prepared in 1982 by  D.M.
Burton  ("Burton").   In 1997 Canamera Geological Ltd. ("Canamera") was commissioned to do a feasibility  study  on  the
Rambler  Property  for  Ming Minerals and drew heavily on Burton's work. Canamera reported remaining  estimates  on  the
property.   Canamera concluded that the outlined mineral resource would not support an economically feasible  operation.
Note that these estimations and resources definitions are not in compliance with Canada's NI 43-101.
Burton  (1982)  classified  the MFZ resources as "Possible". The other resources have not been  classified  by  Canamera
(1997).   These estimates are historical estimates and which should not be relied upon.  See the technical report on the
Rambler property available at www.sedar.com for the full details and qualifications regarding these estimates.

The TSX Venture Exchange has neither approved nor disapproved the contents of this press release. The TSX Venture
Exchange does not accept responsibility for the adequacy or accuracy of this release.

Rambler Metals & Mining Plc