Rambler Reports Latest Drill Results at the Min...

FOR:  RAMBLER METALS & MINING PLC

TSX VENTURE SYMBOL:  RAB
AIM SYMBOL:  RMM

September 23, 2008

Rambler Reports Latest Drill Results at the Ming Mine-Drills 4.00 metres of 0.25 g/T Gold and 4.48%
Copper

LONDON, ENGLAND and BAIE VERTE, NEWFOUNDLAND AND LABRADOR --(Marketwire - Sept. 23, 2008) - Rambler
Metals and Mining plc (TSX VENTURE:RAB)(AIM:RMM) is pleased to announce further positive drill results
from its underground diamond drilling exploration program at the Ming Mine.

Highlights include the following assay results:

/T/

-------------------------------------------------
 Drill Hole    Sample Length          Au       Cu
-------------------------------------------------
 RMUG08-88            2.00 m    0.10 g/t    1.96%
-------------------------------------------------
 RMUG08-103          14.30 m    0.12 g/t    2.36%
-------------------------------------------------
 RMUG08-108           5.00 m    0.17 g/t    2.12%
-------------------------------------------------
 RMUG08-110           4.00 m    0.26 g/t    4.32%
-------------------------------------------------
 RMUG08-114           4.00 m    0.25 g/t    4.48%
-------------------------------------------------
 RMUG08-115           9.65 m    0.13 g/t    2.46%
-------------------------------------------------
 RMUG08-117          13.00 m    0.04 g/t    2.10%
-------------------------------------------------
 RMUG08-119          11.60 m    0.11 g/t    2.44%
-------------------------------------------------

/T/

Lower Footwall Zone

Much of the footwall drilling for this release was from the 2400 drill bay. This area was first tested
in the closing days of the old mine where three holes intersected broad zones of stringer type
mineralization of 2% copper over varying widths. Unfortunately none of the historical core or drill
logs were preserved after the mine's closure and until now only one other hole, RM04-03, confirmed the
exceptional copper grades in this area which returned 12.14 m of 2.32% Cu and 22.10 m of 2.26% Cu.

These latest holes have exceeded all historically reported mineralization, including the 2004 drill
hole, reconfirming that that Lower Footwall Zone is capable of supporting 2% and better copper grades
over significant distances. This new drilling information will upgrade most of this area into the
indicated category or better in-turn strengthening the reported resource estimate. An updated resource
estimate for the entire Ming Mine is expected during calendar 1Q2009.

George Ogilvie, P.Eng, President and CEO, Rambler commented;

"We continue to produce good drilling results from the Lower Footwall Zone which will bolster our long
term mining plan. We are confident that the results of this drill program will continue to build upon
the resource estimate outlined in the NI43-101 Report released on June 16th, 2008."

The table below summarizes the widths, grades and drill station of the recent holes. All underground
drill holes in this release targeted the Lower Footwall Zone.

/T/

---------------------------------------------------------------------------
Target  Drill          Hole     From      To  Length   Length     Au    Cu
        Level                     (m)     (m)     (m)   (feet)  (g/t)   (%)
---------------------------------------------------------------------------
LFZ      1800 GB  RMUG08-88   127.30  130.20    2.00     6.56   0.10  1.96
                  RMUG08-88   132.00  141.20    9.20    30.18   0.06  1.15

LFZ      2200    RMUG08-103   204.40  207.40    3.00     9.84   0.09  1.22
                 RMUG08-103   195.40  197.40    2.00     6.56   0.07  1.28
                 RMUG08-103   238.50  283.80   45.30   148.62   0.08  1.70
              Including       244.50  258.80   14.30    46.92   0.12  2.36
              Including       264.80  274.80   10.00    32.81   0.07  2.08

LFZ      2200    RMUG08-105   161.00  167.60    6.60    21.65   0.08  1.33
                 RMUG08-105   206.60  216.00    9.40    30.84   0.07  1.58

LFZ      2300    RMUG08-108   147.40  187.40   40.00   131.23   0.19  1.09
              including       155.80  166.30   10.50    34.45   0.12  1.92
                 RMUG08-108   203.80  208.80    5.00    16.40   0.17  2.12

LFZ      2300    RMUG08-110   170.10  189.30   19.20    62.99   0.09  1.46
              including       178.00  182.00    4.00    13.12   0.26  4.32
                 RMUG08-110   192.60  207.10   14.50    47.57   0.06  1.20
              including       197.60  206.10    8.50    27.89   0.07  1.70

LFZ      2400    RMUG08-111   135.40  144.10    8.70    28.54   0.08  1.48
                 RMUG08-111   171.70  173.70    2.00     6.56   0.14  1.59

LFZ      2400    RMUG08-112   150.80  154.70    3.90    12.80   0.09  1.82

LFZ      2400    RMUG08-114    93.20  103.20   10.00    32.81   0.15  2.30
              including        97.20  101.20    4.00    13.12   0.25  4.48
                 RMUG08-114   163.00  186.70   23.70    77.76   0.10  1.22
              including       176.20  186.70   10.50    34.45   0.15  1.42

LFZ      2400    RMUG08-115   161.95  183.20   21.25    69.72   0.10  1.93
              including       161.95  171.60    9.65    31.66   0.13  2.46

LFZ      2400    RMUG08-117   191.30  221.70   30.40    99.74   0.04  1.21
              including       195.40  207.00   11.60    38.06   0.09  2.38
                 RMUG08-117   225.40  279.80   54.40   178.48   0.07  1.29
              including       248.70  261.70   13.00    42.65   0.04  2.10
              including       265.70  273.70    8.00    26.25   0.15  1.82

LFZ      2400    RMUG08-119   126.70  167.60   40.90   134.19   0.06  1.04
              Including       155.00  166.60   11.60    38.06   0.11  2.44
                 RMUG08-119   180.70  204.40   23.70    77.76   0.05  1.62

/T/

For more information and a complete listing of all RMM drill intersections, corresponding maps,
figures and NI43-101 compliance information please visit our website at www.ramblermines.com.

Larry Pilgrim, P.Geo. is the Qualified Person responsible for the technical content of this release
and has reviewed and approved it accordingly. Mr. Pilgrim is an independent consultant contracted by
Rambler Metals and Mining plc.

All tonnes are dry metric tonnes.

Drill intercepts quoted are core lengths; true widths for the Lower Footwall Zone are estimated to be
in excess of 90% of the intersected core lengths. Analytical results for Rambler core are first
determined at Eastern Analytical, Springdale, NL. Samples are then shipped by courier to Activation
Laboratories Ltd. ("Actlabs'), Ancaster Ontario, where a 34 element ICP analysis and gold fire assay
are performed. The results presented in this release are based on assay data from Eastern Analytical
and Actlabs'. ActLabs' data, being the accredited lab for this project, will supersede all other
results.

National Instrument 43-101 compliance information regarding sampling and analytical protocols
pertaining to the Rambler Project can be accessed via the following link: http://www.ramblermines.com.

-30-

FOR FURTHER INFORMATION PLEASE CONTACT:

Rambler Metals and Mining Canada Limited
George Ogilvie, P.Eng.
President and CEO
[phone]

OR

Rambler Metals & Mining Plc
Leslie Little
Company Secretary
[phone]
Website: www.ramblermines.com

OR

Seymour Pierce Limited
Nandita Sahgal
[phone]

OR

Pelham Public Relations
Chelsea Hayes/Klara Kaczmarek
[phone] /20-3159-4395

The TSX-Venture Exchange does not accept responsibility for the adequacy or accuracy of this release.

Rambler Metals & Mining Plc